Noise and reliability measurement of a three-axis micro-accelerometer
نویسندگان
چکیده
A special measurement system is developed to measure the combined noise and reliability of a three-axis micro-accelerometer. Three parametric tests are provided: gravitational, thermal and acoustical. The measurements were performed on both the in-plane and the out-of-plane axes. The temperature-dependence and acceleration-dependence of the noise was found, in agreement and contrast to the theories. The device is found to be very reliable when subjected to individual tests, but exhibits slight deviations during the combined tests. 2009 Elsevier B.V. All rights reserved.
منابع مشابه
Design and fabrication of three axes accelerometer
Technology can provide safety in physical practices and improving the performance of these activities, so manufacturing of equipments for these purposes has been considered widely. The aim of the present paper was design and fabrication of three-axis accelerometer. hree acceleration sensors, three gyroscopes for angular velocity measurement, a microcontroller for converting analog data to ...
متن کاملA Wafer Level Vacuum Encapsulated Capacitive Accelerometer Fabricated in an Unmodified Commercial MEMS Process
We present the design and fabrication of a single axis low noise accelerometer in an unmodified commercial MicroElectroMechanical Systems (MEMS) process. The new microfabrication process, MEMS Integrated Design for Inertial Sensors (MIDIS), introduced by Teledyne DALSA Inc. allows wafer level vacuum encapsulation at 10 milliTorr which provides a high Quality factor and reduces noise interferenc...
متن کاملSpecialized Algorithm for Navigation of a Micro Hopping Air Vehicle Using Only Inertial Sensors
The need for accurate and reliable navigation techniques for micro air vehicles plays an important part in enabling autonomous operation. Traditional navigation systems typically rely on periodic GPS updates and provide little benefit when operating indoors or in other similarly shielded environments. Moreover, direct integration of the onboard inertial measurement unit (IMU) data stream often ...
متن کاملCamber Angle Inspection for Vehicle Wheel Alignments
This paper introduces an alternative approach to the camber angle measurement for vehicle wheel alignment. Instead of current commercial approaches that apply computation vision techniques, this study aims at realizing a micro-control-unit (MCU)-based camber inspection system with a 3-axis accelerometer. We analyze the precision of the inspection system for the axis misalignments of the acceler...
متن کاملA New Z-axis Resonant Micro-Accelerometer Based on Electrostatic Stiffness
Presented in the paper is the design, the simulation, the fabrication and the experiment of a new z-axis resonant accelerometer based on the electrostatic stiffness. The new z-axis resonant micro-accelerometer, which consists of a torsional accelerometer and two plane resonators, decouples the sensing movement of the accelerometer from the oscillation of the plane resonators by electrostatic st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009