Effect of cure cycle on curing process and hardness for epoxy resin
نویسندگان
چکیده
A 3-dimensional finite element model is developed to simulate and analyze the temperature and degree of cure field of epoxy casting part during cure process. The present model based on general finite element software ABAQUS is verified by literature example and experimental data. The numerical results show good agreement with literature example and measured data, and are even more accurate than the simulation of literature. After modeling successfully, the influence of temperature cure cycle ramps have on the temperature and degree of cure gradient is investigated. Moreover, the effect of non-uniform temperature and degree of cure field within epoxy casting part on hardness is demonstrated. The present model provides an accurate and novel method that allows further insight into the process of cure for epoxy resin.
منابع مشابه
Optimization of thermal curing cycle for a large epoxy model
Heat generation in an exothermic reaction during the curing process and low thermal conductivity of the epoxy resin produces high peak temperature and temperature gradients which result in internal and residual stresses, especially in large epoxy samples. In this paper, an optimization algorithm was developed and applied to predict the thermal cure cycle to minimize the temperature peak and the...
متن کاملThe Effect of Epoxy-Polysulfide Copolymer Curing Methods on Mechanical-Dynamical and Morphological Properties
Epoxy – Polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.To strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (Epon828) as hard segment was studied. FT-IR spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer. Results obtained f...
متن کاملThe effects of Exposure Times and Light Curing Sources on Surface Micro-Hardness of a Resin Modified Glass Ionomer
Introduction: The aim of this study was to evaluate the influenceof different light curing systems and curing times on the micro-hardness of aresin modified glass ionomer. Methods: Forty two samples of ResinModified Glass Ionomer (RMGI) were prepared using stainless steel cylindrical mold(8 × 2 mm) and randomly divided into six groups of seven. Three groups werecured with a Quartz Tungsten Halo...
متن کاملInfluence of Curing Time and Water Content on Unconfined Compressive Strength of Sand Stabilized Using Epoxy Resin
Improvement and stabilization of soils are widely used to improve the physical and mechanical properties of sandy soils. Despite the abundance of researchers that have been conducted on this topic to date, most of them have focused on dry soil. The effects of the existing water in the soil and different curing durations (curing environment) have not been investigated. In this study, different p...
متن کاملSynthesis and characterization of novel dual UV/thermal curable epoxy rosinate
Rosin has a comprehensive application in adhesives, printing inks, protective coatings, rubbers and pharmaceutical. In this work, novel dual UV/thermal curable epoxy rosinate was synthesized by esterification reaction between epoxy resin and purified rosin. This product was evaluated by FT-IR spectroscopy techniques and acid number. UV curable resin was formulated for UV curing ability by benzo...
متن کامل