Experimental and Numerical Design and Investigation of Flow Field in a Three- Dimensional Artificial Heart Model
نویسندگان
چکیده
Artificial heart devices are required to satisfy high functionality and bio-compatibility demands for successful use. Although the experimental studies play an important role in the design of artificial heart devices, they can provide flow characteristics for limited regions of the flow field. Detailed knowledge of the flow quantities can help the design engineer to improve the artificial heart. Efforts in the development of a modern generation of these devices are supported by the application of the advanced Computational Fluid Dynamics (CFD) methods presented in this study.
منابع مشابه
LDA Experimental Data of Three-Poster Jet Impingement System
During its near-ground hovering phase a Short Take-Off and Vertical Landing (STOVL) aircraft creates a complex three-dimensional flow field between jet streams, the airframe surface and the ground. A proper understanding and numerical prediction of this flow is important in the design of such aircraft. In this paper an experimental facility, used to gather validation data suitable for testing C...
متن کاملFlow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend
Bend existence induces changes in the flow pattern, velocity profiles and water surface. In the present study, based on experimental data, first three-dimensional computational fluid dynamic (CFD) model is simulated by using Fluent two-phase (water + air) as the free surface and the volume of fluid method, to predict the two significant variables (velocity and channel bed pressure) in 90º sharp...
متن کاملکاربرد مدلسازی عددی سهبعدی در شبیهسازی پدیدههای پیچیده مهندسی رودخانه
Most of river engineering problems are complicated and need to be analyzed by three dimensional models of flow and sediment transport. Considering the fact that computers and numerical methods with great ability of flow and sediment transport simulation are developing quickly, using numerical modeling by engineers is inevitable. Nevertheless, before application, numerical models need to be veri...
متن کاملInvestigation of the Bed and Structural Slopes on Bed Shear Stress and Flow Characteristics around an Impermeable Groyne
In this paper, effects of the cross shore and groyne wall slopes on flow parameters around an impermeable groyne were considered using a three-dimensional numerical CFD model (i.e., FLUENT). The k-ε turbulence model was used to evaluate the Reynolds stresses. The model was first applied to a vertical groyne on a flat bed and the model results were compared with the relevant experimental data. T...
متن کاملExperimental study and numerical simulation of three dimensional two phase impinging jet flow using anisotropic turbulence model
Hydrodynamic of a turbulent impinging jet on a flat plate has been studied experimentally and numerically. Experiments were conducted for the Reynolds number range of 72000 to 102000 and a fixed jet-to-plate dimensionless distance of H/d=3.5. Based on the experimental setup, a multi-phase numerical model was simulated to predict flow properties of impinging jets using two turbulent models. Mesh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001