Defect Detection and Imaging from Phased Array Focusing of Ultrasonic Guided Waves
نویسنده
چکیده
The use of numerical and phased array techniques to focus guided waves and perform inspection of plates and pipes has not been widely used; it represents an interesting solution for defect detection and localization. In addition, imaging of ultrasonic guided wave results using color coded B-Scans is also considered a highly valuable tool for data interpretation. While commercial ultrasonic phased array systems have both the ability to perform focusing and present data in B or S-Scan formats, they are not designed to perform guided wave focusing. The present paper presents an experimental study for the implementation of ultrasonic guided wave focal law algorithms into phased array systems. Focal laws are calculated for the inspection of plate structures using ultrasonic Lamb waves generated by the angle beam wedge method. The wedge properties and the considerations for guided waves imaging are outlined in this work.
منابع مشابه
Phased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملPhased array ultrasonic imaging using an improved beamforming based total focusing method for non destructive test
One of the novel ultrasonic phased array based scanning methods for ultrasonic imaging in non-destructive test is total focusing method (TFM). This method employs maximum available information of the phased array elements and leads to an improved defect detection accuracy compared to conventional scanning methods. Despite its high detection accuracy, TFM behaves weak in distinguishing the real ...
متن کاملSuccesses and Challenges in Ultrasonic Guided Waves for NDT and SHM
Emphasis in the paper is placed on describing guided wave successes and challenges for applications in aircraft, composite materials and pipeline inspection. Guided wave imaging methods discussed includes such topics as line of sight, tomography, guided wave C scan, phased array, and ultrasonic vibration methods. Applications outlined encircles lap splice, bonded repair patch, fuselage corrosio...
متن کاملUltrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source
In this paper, the reflection of ultrasonic guided waves from simple dent in pipes has been investigated using finite element method and the relationship between reflection coefficient of these waves and deformation rate has been determined. Also, the effect of the parameters of wave generation source on the generated wave field has been investigated using normal modes expansion method. At firs...
متن کاملDesign, implementation, and comparison of guided wave phased arrays using embedded piezoelectric wafer active sensors for structural health monitoring
Phased array can interrogate large structural areas from a single location using ultrasonic guided waves generated by tuned piezoelectric wafer active sensors that are permanently attached (embedded) to the structure. Various array parameters determine the array beamforming and steering characteristics. This paper aims to bring up several one or two dimension array designs and research on their...
متن کامل