A novel reconfigurable optical interconnect architecture using an Opto-VLSI processor and a 4-f imaging system.
نویسندگان
چکیده
A novel reconfigurable optical interconnect architecture for on-board high-speed data transmission is proposed and experimentally demonstrated. The interconnect architecture is based on the use of an Opto-VLSI processor in conjunction with a 4-f imaging system to achieve reconfigurable chip-to-chip or board-to-board data communications. By reconfiguring the phase hologram of an Opto-VLSI processor, optical data generated by a vertical Cavity Surface Emitting Laser (VCSEL) associated to a chip (or a board) is arbitrarily steered to the photodetector associated to another chip (or another board). Experimental results show that the optical interconnect losses range from 5.8dB to 9.6dB, and that the maximum crosstalk level is below -36dB. The proposed architecture is tested for high-speed data transmission, and measured eye diagrams display good eye opening for data rate of up to 10Gb/s.
منابع مشابه
Reconfigurable optical power splitter/combiner based on Opto-VLSI processing.
A novel 1×4 reconfigurable optical splitter/combiner structure based on Opto-VLSI processor and 4-f imaging system with high resolution is proposed and experimentally demonstrated. By uploading optimized multicasting phase holograms onto the software-driven Opto-VLSI processor, an input optical signal is dynamically split into different output fiber ports with user-defined splitting ratios. Als...
متن کاملNovel broadband reconfigurable optical add-drop multiplexer employing custom fiber arrays and Opto-VLSI processors.
A reconfigurable optical add/drop multiplexer (ROADM) structure based on using a custom-made fiber array and an Opto-VLSI processor is proposed and demonstrated. The fiber array consists of N pairs of angled fibers corresponding to N channels, each of which can independently perform add, drop, and thru functions through a reconfigurable Opto-VLSI beam steerer. Experimental results show that the...
متن کاملImproving the Steering Efficiency of 1x4096 Opto-VLSI Processor Using Direct Power Measurement Method
We report optimization of the steering efficiency of the 1-D Opto-VLSI processor using direct power measurement method for wavelengths in the near-IR and 632 nm. Highest improvement observed for the signal and interport isolation is 8 dB and 12 dB respectively. This improved performance of the processor is crucial to the realization of low crosstalk reconfigurable optical add/drop multiplexers ...
متن کاملHigh-speed (2.5 Gbps) reconfigurable inter-chip optical interconnects using opto-VLSI processors.
Reconfigurablele optical interconnects enable flexible and high-performance communication in multi-chip architectures to be arbitrarily adapted, leading to efficient parallel signal processing. The use of Opto-VLSI processors as beam steerers and multicasters for reconfigurable inter-chip optical interconnection is discussed. We demonstrate, as proof-of-concept, 2.5 Gbps reconfigurable optical ...
متن کاملSelective optical broadcasting in reconfigurable multiprocessor interconnects
Nowadays, multiprocessor systems are reaching their limits due to the large interconnection bottleneck between chips, but recent advances in the development of optical interconnect technologies can allow the use of low cost, scalable and reconfigurable networks to resolve the problem. In this paper, we make an initial evaluation of the performance gain on general network reconfigurability. In a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 17 25 شماره
صفحات -
تاریخ انتشار 2009