Bidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs)
نویسندگان
چکیده
One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane processing required for BFD Control packets is relatively smaller than the processing required for LSP Ping messages. A combination of LSP Ping and BFD can be used to provide faster data plane failure detection and/or make it possible to provide such detection on a greater number of LSPs. This document describes the applicability of BFD in relation to LSP Ping for this application. It also describes procedures for using BFD in this environment.
منابع مشابه
RFC 5884 BFD for MPLS
One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane proc...
متن کاملManagement of DiffServ-over-MPLS Transit Networks with BFD/OAM in ForCES Architecture
This paper proposes a management of DiffServ-over-MPLS transit network with BFD(Bidirectional Forwarding Detection)/OAM (operation, administration and maintenance) in ForCES (Forwarding and Control Element Separation) architecture for QoS-guaranteed DiffServ-over-MPLS traffic engineering. The proposed BFD and ForCES functions are implemented on Intel 2400 network processor, where BFD/OAM packet...
متن کاملRFC 4687 OAM Reqs for Point - to - Multipoint MPLS
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract Multi-Protocol Label Switching (MPLS) has been extended to encompass point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with point-to-point MPLS LSPs, the requirement to detect, handle, and diagnose control ...
متن کاملNetwork Working Group S. Yasukawa Request for Comments: 4687 Ntt Corporation Category: Informational A. Farrel Old Dog Consulting Operations and Management (oam) Requirements for Point-to-multipoint Mpls Networks
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract Multi-Protocol Label Switching (MPLS) has been extended to encompass point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with point-to-point MPLS LSPs, the requirement to detect, handle, and diagnose control ...
متن کاملDetecting Multi-Protocol Label Switched (MPLS) Data Plane Failures
Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract This document describes a simple...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- RFC
دوره 5884 شماره
صفحات -
تاریخ انتشار 2010