3D Rapid Modeling for Headframe Foundation
نویسندگان
چکیده
The design of headframe foundation is always a cumbersome and difficult process. Traditionally its design is focused on 2D construction drawings. Currently it need its 3D model and often proceed finite element analysis for its importance. Based on the analysis of its design and model process we find that the core work of 3D modeling for headframe foundation is its vertices calculation. Therefore we present a rapid 3D modeling method for headframe foundation. 3D coordinates calculation method of its vertices is proposed. Finally a system implementation is given, which can quickly complete a complex modeling task with simple operation. The system has been successfully applied in some projects of Pingmei Group.
منابع مشابه
Electrical Energy Demand Modeling of 3D Printing Technology for Sustainable Manufacture
The advent of 3D printers has been embraced globally within few years of its emergence. The surge in the acceptability of rapid manufacturing RM technology can be attributed to the depletion and cost of natural resources, waste reduction and sustainability criterion of manufactured parts. This rapidly evolving 3D printing technologies is predicted to grow exponentially especially for the manufa...
متن کاملThe study of effective stress and pore water pressures in the foundation of a concrete gravity platform affected by loads due to waves, currents and wind in the Persian Gulf
It is proposed to use a single base platform in the Persian Gulf considering its low depth and more appropriate environmental conditions in comparison to North Sea and Mexico Gulf where this kind of platform is very popular. The pile of platform is responsible for transmission of environmental loads resulted from waves, currents, wind and dead loads to foundation of platform. Using SACS 5.3 sof...
متن کاملA Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls
Architectural limitations in many situations make it necessary for the RC shear walls to be extended in plan in different directions at a single location that makes them a 3D configuration. Analysis of such walls is very challenging. In this research about 450 cases of 3D shear walls are considered with different shapes and heights. L, T and H-shape walls are studied. They are nonlinearly analy...
متن کاملDesigning and Creating a Mouse Using Nature-Inspired Shapes
Human beings have always made their tools and instruments they need using patterns in nature. Mimicking nature has become the foundation of a new science called Biomimetics. In the present article, multiple forms and levels in nature were utilized to design and create a mouse. The rivers are a good source for choosing the shape of a mouse with lots of stones abraded through the centuries which ...
متن کاملMechanisms and prevention of thermal injury from gamma radiosurgery headframes during 3T MR imaging
Magnetic resonance imaging (MRI) is regularly used for stereotactic imaging of Gamma Knife (GK) radiosurgery patients for GK treatment planning. MRI-induced thermal injuries have occurred and been reported for GK patients with attached metallic headframes. Depending on the specific MR imaging and headframe conditions, a skin injury from MRI-induced heating can potentially occur where the four h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- JCP
دوره 6 شماره
صفحات -
تاریخ انتشار 2011