Selective Oxidation on High-Indium-Content InAlAs/InGaAs Metamorphic High-Electron-Mobility Transistors

نویسندگان

  • Yeong-Her Wang
  • Kuan-Wei Lee
چکیده

Up to now, many efforts have been continuously channeled toward the development of oxidation techniques on the III-V compounds for GaAs-based device application, which include thermal oxidation [1-7], chemical anodization [8-12], photochemical oxidation [13-16], plasma oxidation [17-20], Ga2O3 grown by molecular beam epitaxy (MBE) [21-23], Al2O3 grown by atomic layer deposition (ALD) [24], oxidized GaAs or InAlAs prepared by ultraviolet and ozone [25-27], and so on. Although the electrical quality of the GaAs-based MOS structures demonstrated to date is not as good as those obtained from the more mature SiO2/Si system, some of them have yielded promising results for electronic and optoelectronic applications. However, the growth of oxides on the III-V surface is more complex than that on Si. Most of these methods require condensed gases, energy sources (such as excited plasma, electric potential, or optical illumination) or ultrahigh vacuum chamber, and so on, which complicate the oxidation process. In the past years, a technique named liquid phase oxidation (LPO) [28] on GaAs-based materials operated at low temperature (30 oC to 70 oC) has been proposed and investigated. Much progress has been made to form a high-quality oxide on GaAs, for example, the mechanism and kinetics of oxidation [29], fabrication of GaAs MOSFET [30], pre-treatment and post-oxidation annealing of the oxide [31, 32], and GaAs-based devices [33, 34]. The oxidation takes place through the in-diffusion of oxygen at the semiconductor-oxide interface, where a fresh interface at the original semiconductor surface is achieved. This is an easy, economic, and low-temperature method to grow uniform and smooth native oxide films on GaAs-based materials. Utilizing the electroless technique, neither vacuum, gas condensation equipment, nor an assisting energy source is needed. Meanwhile, the technique has potential advantages for electronic and optical device applications due to its 7

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reliability and degradation mechanism of AlGaAs/InGaAs and InAlAs/InGaAs HEMTs

The long-term stability of AlGaAs/GaAs and InAlAs/InGaAs high electron mobility transistors (HEMTs), tested under high drain voltage and/or high temperature operation is reported. HEMTs with high In content in the active channel, alternatively fabricated on InP substrates and on GaAs substrates covered by a metamorphic buffer (MHEMT), are compared. Despite the high dislocation density in the bu...

متن کامل

Fabrication and Characterization of 0.2μm InAlAs/InGaAs Metamorphic HEMT’s with Inverse Step- Graded InAlAs Buffer on GaAs Substrate

Metamorphic InAlAs/InGaAs HEMT are successfully demonstrated, exhibiting several advantages over conventional P-HEMT on GaAs and LM-HEMT on InP substrate. The strainrelaxed metamorphic structure is grown by MBE on the GaAs substrate with the inverse-step graded InAlAs metamorphic buffer. The device with 40% indium content shows the better characteristics than the device with 53% indium content....

متن کامل

Quantum-Well Transistors on Silicon Substrate

The direct epitaxial growth of ultrahigh-mobility InGaAs/InAlAs quantum-well (QW) device layers onto silicon substrates using metamorphic buffer layers is demonstrated for the first time. In this letter, 80 nm physical gate length depletionmode InGaAs QW transistors with saturated transconductance gm of 930 μS/μm and fT of 260 GHz at VDS = 0.5 V are achieved on 3.2 μm thick buffers. We expect t...

متن کامل

Simulation of InAlAs/InGaAs High Electron Mobility Transistors with a Single Set of Physical Parameters

Simulation results of InAlAs/InGaAs High Electron Mobility Transistors based on both GaAs and InP substrates are presented using the two-dimensional device simulator MINIMOS-NT. Three different HEMT technologies are evaluated by simulation and a single set of physical parameters is verified. The critical interaction of selfheating, impact ionization, SiN surface effects, and material compositio...

متن کامل

Manufacturable AlSb/InAs HEMT Technology for Ultra-Low Power Millimeter-Wave Integrated Circuits

High electron mobility transistors with InAs channels and sub 0.1m metal gates, have demonstrated a 100% improvement in low-power, high-speed figure of merits over conventional InAlAs/InGaAs lattice-matched HEMTs and MHEMTs. AlSb/InAs MHEMTs exhibit transconductances as high as 1.3 S/mm at drain biases as low as 0.3 V, while maintaining fT and fmax results greater than 220 GHz and 270 GHz, resp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012