Effect of Boundary Misorientation on Yielding Behavior of Nanostructured High
ثبت نشده
چکیده
3 IMR KINKEN Research Highlights 2011 IMR KINKEN Research Highlights 201
منابع مشابه
An energy analysis of the grain boundary behavior in cleavage cracking in Fe–3wt.%Si alloy
The resistance of high-angle grain boundaries to cleavage cracking in Fe–3wt.%Si bicrystals is discussed in context of linear elastic fracture mechanics based on an energy method. The grain boundary toughness is determined by the fracture work associated with the plastic shear along the grain boundary and the crack-trapping effect. The influence of the crystallographic misorientation and the si...
متن کاملA Tri-modal 2024 Al -B4C composites with super-high strength and ductility: Effect of coarse-grained aluminum fraction on mechanical behavior
In this study, ultrafine grained 2024 Al alloy based B4C particles reinforced composite was produced by mechanical milling and hot extrusion. Mechanical milling was used to synthesize the nanostructured Al2024 in attrition mill under argon atmosphere up to 50h. A similar process was used to produce Al2024-5%wt. B4C composite powder. To produce trimodal composites, milled powders were combined w...
متن کاملEFFECT OF SPIRAL DESIGN ON CRYSTAL ORIENTATION DURING SINGLE CRYSTAL GROWTH
Geometrical design of the spiral crystal selector can affect crystal orientation in the final single crystal structure. To achieve a better understanding of conditions associated with the onset of crystal orientation in a spiral crystal selector, temperature field was investigated using three-dimensional finite element method during the process. Different geometries of spiral crystal selec...
متن کاملComparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock
Due to low stiffness of braces after yielding, the structures with buckling-restrained braces (BRBs) experience high residual drifts during an earthquake, which can be intensified by aftershocks and causes considerable damages to structures. Also, due to poor distribution of stiffness, this problem is exacerbated for irregular structures. Recently, the yielding brace system (YBS) has been intro...
متن کاملInvestigation of oxidation behavior and Thermal spray of mechanically milled CoNiCrAlY–YSZ powders
In this study, the effects of mechanical milling and YSZ reinforcing on oxidation behavior of CoNiCrAlY coatings were investigated. Various amounts of YSZ particles (0%, 5%, 10% and 15 wt.%) were mixed with commercial CoNiCrAlY powder and milled for 24 hrs. Then, the mechanically milled and commercial powders were deposited on Inconel 617 substrate using High Velocity Oxygen-Fuel (HVOF) process...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011