Microscale simulation of martensitic microstructure evolution.
نویسندگان
چکیده
A new model for the evolution of multivariant martensitic microstructure in single crystals and polycrystals is developed. In contrast with Landau-Ginzburg models, which are limited in practice to nanoscale specimens, this new scale-free model is valid for length scales greater than 100 nm and without an upper bound. It is based on a thermodynamic potential in the volume fractions of the martensitic variants that exhibits an instability resulting in microstructure formation. Simulated microstructures in elastic single crystals and polycrystals under uniaxial loading are in qualitative agreement with those observed experimentally.
منابع مشابه
Phase-field modeling of martensitic microstructure in NiTi shape memory alloys
A phase-field model is developed to study the cubic to monoclinic martensitic phase transformation in nickel–titanium (NiTi) shape memory alloys. Three-dimensional phase-field simulations show the nucleation and growth of monoclinic B190 multivariants that form a polytwinned martensitic microstructure. Parametric studies demonstrate that mechanical constraints and crystallographic orientation g...
متن کاملFinite element simulation of microstructure evolution during friction stir welding of automotive aluminum parts
7000 series Aluminum alloys are widely used in the automotive industries for structural lightweight components due to their exceptional high strength to weight ratio. However, this class of aluminum alloy is difficult to join by conventional fusion welding techniques so Friction stir welding (FSW) widely is used for welding this alloys. The process has been demonstrated to be effective and is c...
متن کاملMultiscale Modeling of Polycrystalline NiTi Shape Memory Alloy under Various Plastic Deformation Conditions by Coupling Microstructure Evolution and Macroscopic Mechanical Response
Numerical modeling of microstructure evolution in various regions during uniaxial compression and canning compression of NiTi shape memory alloy (SMA) are studied through combined macroscopic and microscopic finite element simulation in order to investigate plastic deformation of NiTi SMA at 400 °C. In this approach, the macroscale material behavior is modeled with a relatively coarse finite el...
متن کاملMultiscale damage simulation
Numerous materials show a softening behaviour at dynamic loading. The decrease of stress is caused by the evolution in the microscale in terms of areas where the local stiffness is reduced, e.g. due to micro-void growth. For a numerical treatment of this material behaviour, phenomenological damage approaches are used in daily engineering practice. For a better understanding of the micromechanic...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Physical review letters
دوره 93 10 شماره
صفحات -
تاریخ انتشار 2004