Electrolyte Degradation in Anode Supported Microtubular YSZ-based Solid Oxide Steam Electrolysis Cells at high voltages of operation

نویسندگان

  • M. A. Laguna-Bercero
  • R. Campana
  • A. Larrea
  • J. A. Kilner
  • V. M. Orera
چکیده

Degradation of solid oxide electrolysis cells (SOECs) is probably the biggest concern in the field of high temperature steam electrolysis (HTSE). Anode supported, YSZ-based microtubular solid oxide fuel cells (SOFC) have been tested in fuel cell mode and also at high voltages (up to 2.8V) under electrolysis mode. At high steam conversion rates the cell voltage tends to saturate. Our hypothesis is that this effect is caused by the electroreduction of the thin YSZ electrolyte which induces electronic conduction losses. YSZ reduction increases the cathode activity and reduces cathode overpotential. Operation of the cell in severe electrolyte reduction conditions induces irreversible damage at the YSZ electrolyte as observed in SEM experiments by the formation of 1 Presented at Fuel Cells Science & Technology 2010, Zaragoza, Spain, 6-7 October

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance and Aging of Microtubular YSZ-based Solid Oxide Regenerative Fuel Cells

Fuel electrode supported microtubular solid oxide fuel cells (SOFC) fabricated at ICMA have been characterized in both solid oxide steam electrolyser (SOEC) and fuel cell modes. The cells consists of a fuel electrode supporting tube of Ni/YSZ with 40% porosity, 400 μm thickness, 2.4 mm diameter and 100-150 mm length, a 15 m thick YSZ electrolyte and a 50vol% LSM/YSZ composite air electrode of...

متن کامل

Steam Electrolysis Using a Microtubular Solid Oxide Fuel Cell

Reversible operation of a microtubular solid oxide fuel cell SOFC with high electrochemical efficiency is reported. These devices can ideally produce hydrogen from electricity and steam solid oxide electrolyser SOE and then use the stored hydrogen to generate electricity and heat SOFC , acting as a storage device for the electrical energy. A fuel-electrode-supported Ni–yttriastabilized zirconia...

متن کامل

Tailoring the Microstructure of a Solid Oxide Fuel Cell Anode Support by Calcination and Milling of YSZ

In this study, the effects of calcination and milling of 8YSZ (8 mol% yttria stabilized zirconia) used in the nickel-YSZ anode on the performance of anode supported tubular fuel cells were investigated. For this purpose, two different types of cells were prepared based on a Ni-YSZ/YSZ/Nd2NiO4+δ-YSZ configuration. For the anode preparation, a suspension was prepared by mixing NiO and YSZ in a ra...

متن کامل

Analysis of the Performance of the Electrodes in a Natural Gas Assisted Steam Electrolysis Cell

The performance of solid oxide electrolysis (SOE) cells while operating in the natural gas assisted steam electrolysis (NGASE) mode was evaluated. The SOE cells used yttria-stabilized-zirconia (YSZ) as the oxygen ion conducting electrolyte, Co–CeO2–YSZ as the H2–H2O electrode, and Pd-doped CeO2 YSZ source as the CH4-oxidation electrode. The cell electrochemical performance was evaluated as a fu...

متن کامل

Preparation of NiO-YSZ/YSZ bi-layers for solid oxide fuel cells by electrophoretic deposition

A simple and cost-effective method, starting with electrophoretic deposition (EPD) on a carbon sheet, has been developed for preparation of a iO-YSZ anode and thin, gas-tight YSZ electrolyte layer on it for use in solid oxide fuel cells (SOFCs). The innovative feature of this approach nables the deposition of anode materials as well as the YSZ electrolyte, which were subsequently co-fired in ai...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014