Measurements at Slac on Superconducting Niobium Cavities and Structures
نویسندگان
چکیده
Tests are continuing at SLAC on superconducting niobium cavities and structures at Sand X-band frequencies. Peak electric and magnetic fields on the order of 20 MV/m and 400 G have been obtained in a TM mode cavity at 2.85 GHz with unloaded Q’s at high fields on the order of 1010. These fields and Q’s are adequate for superconducting RF systems for high energy storage rings and recirculating linear accelerators.
منابع مشابه
RECENT MEASUREMENTS AT SLAC ON SUPERCONDUCTING NIOBIUM X - BAND CAVITIES ’ bilarch
Measurements at 8.6 GHz on TM mode superconducting niobium cavities have been carried out at SLAC in an attempt to establish definitive conditions for reproducibly attaining high peak electric and magnetic fields and high residual &Is. Four cavities, processed by techniques which insure thepresence of an oxi& layer on the niobium surface before final high temperature outgassing, have given peak...
متن کامل* * (acc) 'i " Superconducting Niobium Cavit+ Measurements at Slac*
The program of measurements at SLAC on superconduct. I ;r. ing niobium cavities is described. Results for TE and TM mode X-band cavities are presented. An RF magnetic breskdown field of 960 gauss and Q values greater than 1011 were measured for an electron beam welded TEOII mode cavity at ‘I 10.5 GHz. The best result for a TM mode cavity was a Q of 1.4 x log and a breakdown field of 360 gauss, ...
متن کاملStudy of Ac/rf Properties of Srf Ingot Niobium
In an attempt to correlate the performance of superconducting radiofrequency cavities made of niobium with the superconducting properties, we present the results of the magnetization and ac susceptibility of the niobium used in the superconducting radiofrequency cavity fabrication. The samples were subjected to buffer chemical polishing (BCP) surface and high temperature heat treatments, typica...
متن کاملImpact of Trapped Flux and Thermal Gradients on the Srf Cavity Quality Factor
The obtained Q0 value of a superconducting niobium cavity is known to depend on various factors like the RRR of the Niobium material, crystallinity, chemical treatment history, the high-pressure rinsing process, or effectiveness of the magnetic shielding. We have observed that spatial thermal gradients over the cavity length during cool-down appear to contribute to a degradation of Q0. Measurem...
متن کاملANALYSIS AND RESULTS OF THE INDUSTRIAL PRODUCTION OF THE SUPERCONDUCTING Nb/Cu CAVITIES FOR THE LEP 2 PROJECT
For the energy upgrade of the Large Electron Positron Collider at CERN, 216 RF superconducting cavities were ordered from three European industrial firms (Ansaldo,Cerca,Siemens/Accel) at the beginning of 1991. These cavities are made of copper (Cu), internally coated with niobium (Nb) according to a procedure developed at CERN. Up to now about 147 of these cavities fulfilling the specifications...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1971