Transient Thermomechanical Contact of an Impacting Sphere on a Moving Flat
نویسندگان
چکیده
Contact between a slider and a magnetic recording disk is modeled as transient contact of a sphere on a moving flat. The sphere is assumed to be rigid, and the flat is treated as an elastic-plastic body with isotropic hardening. Heat generation is related to friction at the contact interface. Dimensionless solutions are obtained for maximum temperature rise, maximum contact force, maximum contact area, and maximum penetration as a function of dimensionless vertical initial velocity of the sphere. It is observed that transient thermomechanical contact with elastic-plastic deformation deviates from “classical theories” for dynamic elastic and quasi-static elastic-plastic contacts as the dimensionless vertical initial velocity of the sphere increases. The results are applied to optimize the slider-disk interface in a hard disk drive with respect to slider-disk contacts. [DOI: 10.1115/1.4003996]
منابع مشابه
Unsteady Free Convection from a Sphere in a Porous Medium with Variable Surface Temperature
In this paper a transient free convection flow around a sphere with variable surface temperature and embedded in a porous medium has been considered. The temperature of the sphere is suddenly raised and subsequently maintained at values that varies with position on surface. The method of asymptotic expansions is applied for small Rayleigh numbers and then a finite-difference scheme is used to s...
متن کاملA Novel Approach to Trace Time-Domain Trajectories of Power Systems in Multiple Time Scales Based Flatness
This paper works on the concept of flatness and its practical application for the design of an optimal transient controller in a synchronous machine. The feedback linearization scheme of interest requires the generation of a flat output from which the feedback control law can easily be designed. Thus the computation of the flat output for reduced order model of the synchronous machine with simp...
متن کاملThermomechanical Analysis of Exhaust Manifold and Catalyst for with Fluid Structure Interaction
Design of exhaust manifold is important due to its effects on performance of catalyst, thermal and thermo- mechanical loads. In this paper, first transient analysis of fluid was carried out with FLUENT software, then time-average temperature and heat transfer coefficient contour for three cycle were mapped on inner surface of exhaust manifold with MATLAB software for thermomechanical analysis. ...
متن کاملPropose a New Model for Prediction of the Impact Wear Using an Experimental Method
Impact wear can be defined as the wear of a solid surface that is due to percussion, which is a repetitive exposure to dynamic contact by another solid body. It generally has the devastating effects on the mechanical elements and causes the equipments to shift away from their normal performance. Impact wear has not been studied as extensive as other wear mechanisms and as a result information o...
متن کاملNUMERICAL INVESTIGATION OF CRACK ORIENTATION IN THE FRETTING FATIGUE OF A FLAT ROUNDED CONTACT
The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion....
متن کامل