Design of Compact Printed Antenna for UMTS & WiMAX Applications
نویسنده
چکیده
Abstract:In telecommunications, there are several types of microstrip antennas, the most common of which is microstrip patch antenna. Patch antennas are also relatively inexpensive to manufacture and design because of simple 2D physical geometry. In this paper Two L slits are introduced at the both edge of the patch to reduce the resonant frequency. The proposed antenna is developed to operate in the WiMax frequency ranges of 2.5-2.69 GHz & 3.2-3.8 GHz. The size of the antenna has been reduced by 73 % when compared to a conventional microstrip patch.
منابع مشابه
New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE)
This paper presents a new design of a CPW-Fed multi bands planar antenna. This antenna can be integrated easily with passive and active elements. The proposed antenna is suitable to operate for GPS, PCS and WiMAX bands. Its entire area is 52.3x52.6mm2 and is employed on an FR-4 epoxy substrate and fed by a 50 Ohm coplanar line. The antenna parameters have been analyzed and optimized by using AD...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملInternal Compact Printed Loop Antenna with Matching Element for Laptop Applications
An internal compact printed loop antenna with matching element is presented for laptop applications. Bending to the printed loop structure is employed to reduce the size of antenna. A matching element is used at backside of the substrate to enhance the bandwidth of the antenna. The matching element is of rectangular shape with inverted U shape slot in it. The proposed antenna with wideband char...
متن کاملA Small Printed Quadrifilar Helical Antenna for BGAN/GPS Applications
This paper presents an element of a 2×2-element array antenna for Inmarsat BGAN/GPS applications. The element is an axial mode printed quadrifilar helical antenna that has been integrated with a compact feed network to provide sequential phase rotation for circular polarization (CP) radiation. The novel integrated lumped-element feed network is designed to provide a balanced RF power to the fou...
متن کاملDesign of A Compact CPW-FED UWB Antenna with WiMAX and WLAN Band-Notched Characteristic Evaluated in AHP Framework
In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...
متن کامل