An analytical solution for an inflated orthotropic membrane tube with an arbitrarily oriented orthotropy basis
نویسندگان
چکیده
HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d’enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.
منابع مشابه
Crack analysis of an orthotropic circular bars reinforced by a magnetic coating under Saint-Venant torsion
This paper presents an analytical solution for an orthotropic circular cross section bar with a magnetic coating weakened by multiple arbitrary oriented cracks under Saint-Venant torsion by means of the distributed dislocation technique. At first, the solution of the orthotropic bar with a magnetic coating weakened by a Volterra-type screw dislocation is achieved with the aid of the finite Four...
متن کاملDiffraction of flexural waves by cracks in orthotropic thin elastic plates. I Formal solution
The problem of flexural wave diffraction by a semi-infinite crack in an infinite orthotropic thin plate is considered. Such models have application to the ultrasonic non-destructive inspection of thin components, such as aeroplane wings. For simplicity, the plate is modelled using Kirchhoff theory, and the crack is chosen to be aligned along one of the principal directions of material orthotrop...
متن کاملSome new theoretical results for orthotropic inflatable beams
A so-called inflatable beam is a membrane tube which gains its stiffness only by a prescribed internal pressure. Such lightweight structures are useful in inflatable buildings and particularly in space industry, whenever rapidly deployable and easily transportable structures are required. An inflatable beam may look like a standard beam, but its mechanism is quite different and a specific mecha...
متن کاملAnalytical Stress Solutions of an Orthotropic Sector Weakened by Multiple Defects by Dislocation Approach
In this article, the anti-plane deformation of an orthotropic sector with multiple defects is studied analytically. The solution of a Volterra-type screw dislocation problem in a sector is first obtained by means of a finite Fourier cosine transform. The closed form solution is then derived for displacement and stress fields over the sector domain. Next, the distributed dislocation method is em...
متن کاملOptimization of infinite composite plates with quasi-triangular holes under in-plane loading
This study used particle swarm optimization (PSO) to determine the optimal values of effective design variables acting on the stress distribution around a quasi-triangular hole in an infinite orthotropic plate. These parameters were load angle, hole orientation, bluntness, fiber angle, and material properties, which were ascertained on the basis of an analytical method used by Lekhnitskii [3]. ...
متن کامل