Comparison between nMos Pass Transistor logic style vs. CMOS Complementary Cells
نویسندگان
چکیده
This paper compares three different logic styles for implementing arbitrary Boolean functions of upto three inputs in terms of their layout area, delay and power dissipation. The three styles are nMOS pass transistor based design, NAND gate based design, and CMOS complementary logic design. Results of the comparison show that pass transistor based design is superior to NAND based design, but loses to CMOS complementary logic design.
منابع مشابه
An Integrated Placement and Synthesis Approach for Timing Closure of PowerPC Microprocessors
Power Compiler: A Gate-Level Power Optimization and Synthesis System p. 74 Elastic History Buffer: A Low-Cost Method to Improve Branch Prediction Accuracy p. 82 Design Optimization for High-Speed Per-address Two-level Branch Predictors p. 88 PA-8000: A Case Study of Static and Dynamic Branch Prediction p. 97 Discrete Drive Selection for Continuous Sizing p. 110 Continuous Retiming: Algorithms a...
متن کاملLow-Power Logic Styles: CMOS Versus Pass-Transistor Logic
Recently reported logic style comparisons based on full-adder circuits claimed complementary pass-transistor logic (CPL) to be much more power-efficient than complementary CMOS. However, new comparisons performed on more efficient CMOS circuit realizations and a wider range of different logic cells, as well as the use of realistic circuit arrangements demonstrate CMOS to be superior to CPL in m...
متن کاملLow Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit ...
متن کاملDesign and Analysis of CMOS Based DADDA Multiplier
Multiplier is an important circuit used in electronic industry especially in digital signal processing operations such as filtering, convolution and analysis of frequency. There are different types of algorithms used in multipliers to achieve better performance. Array multiplier and Wallace tree multiplier are such types of multipliers constructed by using CMOS logic styles such as Swing Restor...
متن کاملA New Design Technique of Reversible BCD Adder Based on NMOS With Pass Transistor Gates
In this paper, we have proposed a new design technique of BCD Adder using newly constructed reversible gates are based on NMOS with pass transistor gates, where the conventional reversible gates are based on CMOS with transmission gates. We also compare the proposed reversible gates with the conventional CMOS reversible gates which show that the required number of Transistors is significantly r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997