Study on the Properties of UHMW-PE Film
نویسندگان
چکیده
Some physicochemical properties of UHMW-PE film such as gas permeability, tensile strength, and corrosion resistance in acid with different immersion time, various concentrations and various solutions and rattler testing were studied. The obtained results showed that the values of gas permeability, tensile strength, elongation at break, and the temperature of dissociation at weight loss 5% was 546.57 cm3∙m−2∙24 h∙0.1 MPa, 37.22 MPa, 368.00%, 360 ̊C, respectively. In different concentration acid, the surface resistance of film accumulated to some extent with immersion time increasing, together with that the higher acid concentration was, the lower the surface resistance of film was. Moreover, the contact angle of films gradually increased with the acid concentration decreasing and the increase of immersion time. After wear testing, the mass of UHMW-PE film did not nearly change, while the contact angle became larger with the number of turning increasing and the value was more than 90 ̊.
منابع مشابه
Rheological, thermal and tensile properties of PE/nanoclay nanocomposites and PE/nanoclay nanocomposite cast films
The effects of three different mixers, two different feeding orders and nanoclay content on the structure development and rheological properties of PE/nanoclay nanocomposite samples were investigated. Fractional Zener and Carreau–Yasuda models were applied to discuss the melt linear viscoelastic properties of the samples. Moreover, scaling law for fractal networks was used to quantify clay disp...
متن کاملSupercritical Co2 Impregnation of Polyethylene Components for Medical Purposes
Modern hip and knee endoprosthesis are produced in titanium and to reduce the friction at the contact area polymer parts, mainly ultra-high molecular weight polyethylene (UHMW-PE), are installed. The polyethylene is impregnated with αtocopherol (vitamin E) before processing for remarkable decrease of oxidative degradation. Cross linked UHMW-PE offers much higher stability, but α-tocopherol cann...
متن کاملDeformation behavior of oriented UHMW-PE fibers
The mechanical behavior of gel-spun, ultra-drawn, UHMW-PE fibers was investigated as a function of temperature, stress, and time under static and dynamic loading conditions. From a phenomenological point of view, two separate contributions to the deformation behavior could be distinguished, i.e., a reversible (viscoelastic) contribution and an irreversible plastic flow component. It was investi...
متن کاملWell-defined PE-b-PTFE diblock copolymers via combination of coordination chain transfer polymerization and condensation reaction: Facile preparation and surface modification of polyethylene film
In this paper, a series of well-defined polyethylene-b-polytetrafluoroethylene diblock copolymers (PE–b– PTFEs) were prepared by a coupling reaction of hydroxyl-terminated polyethylene (PE–OH) and isocyanateterminated 1H,1H-perfluoro-1-tetradecanol (PFDO–NCO). PE–OH was prepared by the coordination chain transfer polymerization using 2,6-bis[1-(2,6-diisopropylphenyl)imino ethyl] pyridine iron (...
متن کامل