Biomedical Sensing with Hydroxyapatite Ceramics in GHz Frequency Range
نویسندگان
چکیده
Hydroxyapatite (HA) is a leading biocompatible material extensively used for bone implants as a porous ceramic graft and as a bioactive coating. Electrical characteristics of HA can be employed in implantable devices for real-time in vivo pressure sensor applications such as in knee or hip prosthesis. In particular, high piezo and pyroelectricity of HA, its polarisation by electron beam and selective adsorption of proteins on polarised domains indicate the potential for real-time biosensing applications of HA. For this purpose, a comprehensive understanding of the dielectric behaviour of different forms of HA over a frequency range relevant for biomedical sensing is critical. Such information for HA, especially its frequency dependent dielectric behaviour over the GHz range, is rare. To this end, we report on novel investigations of properties of HA in powder and film forms in the GHz frequency range.
منابع مشابه
Synthesis of Peculiar Structure of Hydroxyapatite Nanorods by Hydrothermal Condition for Biomedical Applications
In the present work, the effect of Ca(NO3)2.4H2O and (NH4)2HPO4 primary solutions as the beginning materials in synthesis of a calcium phosphate phase, was examined. So, we investigated the wet chemical reactions in solution at different temperatures by a hydrothermal condition aimed at hydroxyapatite (Ca10(PO<su...
متن کاملHydroxyapatite coating on porous zirconia
Since hydroxyapatite has excellent biocompatibility and bone bonding ability, porous hydroxyapatite ceramics have been intensively studied. However, porous hydroxyapatite bodies are mechanically weak and brittle, which makes shaping and implantation difficult. One way to solve this problem is to introduce a strong porous network onto which hydroxyapatite coating is applied. In this study, porou...
متن کاملDesign and Simulation of an X Band LC VCO
In this paper, a systematic method for the circuit parameters design of a monolithic LC Voltage Controlled Oscillator (VCO) is reported. The method is based on the negative resistance generation technique. As a result, a VCO has been designed in 0.18um CMOS technology using a conventional VCO structure to obtain the optimum values for the phase noise and power consumption. The simulation result...
متن کاملBroadband Dielectric Characterization of Aluminum Oxide (Al2O3)
Applications for low temperature co-fired ceramics (LTCC) and high temperature co-fired ceramics (HTCC) are advancing to higher frequencies. In order to design ceramic microsystems and electronic packages, the electrical properties of materials must be well characterized over a broad frequency range. In this study, the dielectric properties of commercial Aluminum Oxide (Al2O3) with different gl...
متن کاملBMP-induced osteogenesis on the surface of hydroxyapatite with geometrically feasible and nonfeasible structures: topology of osteogenesis.
Bone morphogenetic protein (BMP) is known to require a suitable carrier to induce ectopic bone formation in vivo. Hydroxyapatite ceramics have been reported to be effective in some forms but ineffective in others as a carrier of BMP-induced bone formation. In this study we compare three geometrically different forms of hydroxyapatite to examine their functions as carriers of BMP-induced bone fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012