Energy efficiency maximization for 5G multi-antenna receivers

In a digital communication system, the analog signal that the receiver receives with its radio frequency front end is converted into digital format by using the analog-to-digital converter (A/D converter, ADC). Quantisation takes place during the conversion from continuous amplitude signal to discrete amplitude signal, leading inevitably to losses in information which are dependent on the number of bits that is used to represent each sample. Although employing a higher bit resolution reduces the quantisation error, a higher power dissipation of the ADC is incurred at the same time. This trade-off is essential to the energy efficiency of the receiver, which is commonly measured by the number of information bits conveyed per consumed Joule of energy. We investigate, in this work, the adaptation of ADC resolutions of a multi-antenna receiver based on instantaneous channel knowledge, with the goal of maximising receiver energy efficiency. The formulated optimisation is a combinatorial problem, and we propose several algorithms which yield near-optimal solutions. Results from numerical simulations are presented and analysed, which provide guidelines to operation and deployment of the system. Copyright © 201 John Wiley & Sons, Ltd. *Correspondence Q. Bai, Institute for Circuit Theory and Signal Processing, Technische Universität München, Theresienstr. 90, 80333 Munich, Germany. E-mail: [email protected] Received 14 July 2014; Accepted 14 September 2014