Study of Different Edge Terminations Used for 6H-SiC Power Diodes

نویسنده

  • Sylvie Ortolland
چکیده

Silicon Carbide is a wide bandgap semiconductor (3 eV for 6H-SiC at 300 K) suitable for high voltage, high temperature, high frequency and power devices. Its drift velocity

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

4H-SiC pn Diode using Internal Ring(IR) Termination Technique

In this paper, the breakdown characteristic of 4H-SiC pn diode using Internal Ring(IR) termination technique is investigated. N-type 4H-SiC wafer having a 10um epilayer with a doping concentration of 5.4×10 15 /cm 3 was used to fabricate the pn diodes with one or two IRs. IR was formed by boron implantation of single energy of 360keV with 5×10 14 /cm 2 dose and activation annealing at 1700 o C ...

متن کامل

Sublimation Growth and Performance of Cubic Silicon Carbide

Current advancement in electronic devices is so rapid that silicon, the semiconductor material most widely used today, needs to be replaced in some of the fields. Silicon carbide (SiC) is a wide band gap semiconductor satisfying requirements to replace silicon in devices operating at high power and high frequency at elevated temperature, and in harsh environments. Hexagonal polytypes of SiC, su...

متن کامل

A Review of SiC Reactive Ion Etching in Fluorinated Plasmas

Research and development in semiconducting silicon carbide (SiC) technology has produced significant progress in the past five years in many areas: material (bulk and thin film) growth, device fabrication, and applications. A major factor in this rapid growth has been the development of SiC bulk crystals and the availability of crystalline substrates. Current leading applications for SiC device...

متن کامل

Cree SiC Power White Paper: The Characterization of dV/dt Capabilities of Cree SiC Schottky diodes using an Avalanche Transistor Pulser

Rev. Introduction Since the introduction of commercial silicon carbide (SiC) Schottky diodes over 10 years ago, significant improvements in power factor correction (PFC) circuits and motor drives have been realized due to the elimination of minority carrier reverse recovery charge and its resulting switching loss associated with traditional PiN diodes. The early adoption of SiC Schottky diodes ...

متن کامل

Temperature-Dependent Study of 6H-SiC PiN-Diode Static Forward and Reverse Characteristics

Forward and Reverse Characteristics M. Lades y, A. Schenk ], U. Krumbein ], G. Wachutka y, W. Fichtner ] yPhysics of Electrotechnology, Tech. Univ. of Munich, Germany ]Integrated Systems Laboratory, ETH{Z urich, Switzerland A numerical analysis of the static forward and reverse characteristics of 6H-SiC PIN-diodes has been performed across a temperature range of 300 623 K. Using the device sim...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017