Effect of Mg addition on microstructure and mechanical properties of aluminum
نویسندگان
چکیده
The effect of Mg addition on the microstructural evolution and mechanical properties of high-purity aluminum was studied over a wide range of strain, up to ∼8. The high strains were achieved by applying the equal-channel angular pressing technique. The stress–strain relationship was related to the evolution of the microstructure investigated by transmission electron microscopy and X-ray diffraction peak profile analysis. In the early stages of plastic deformation the interaction between the dislocations and the Mg solute atoms results in an increase of the flow stress with temperature. The stable microstructure is developed at higher strains owing to the Mg addition resulting in the saturation of the proof stress at higher strains in Al–Mg alloys. © 2004 Elsevier B.V. All rights reserved.
منابع مشابه
Effect of Aluminum on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys
متن کامل
Effect of Aluminum on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys
متن کامل
Effect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion
In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...
متن کاملImproving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004