Task 2.6: Mechanical Freeze/Thaw and Freeze Concentration of Water and Wastewater Residuals
ثبت نشده
چکیده
منابع مشابه
The Effects of Concrete Pavement Mix Design Parameters on Durability under Freeze and Thaw Condition
This paper is based on an experimental research that examined the effects of concrete`s major parameters on durability of concrete pavements and curbs under freezing and thawing cycles. These parameters include concrete mix design parameters such as water-cement ratio, fine aggregate percentage and using air entraining admixture and simulating real freeze-thaw cycles that infrastructures underg...
متن کاملStrength Characteristics of Clay Mixtures with Waste Materials in Freeze-Thaw Cycles
Waste tires, rubbers, plastic and steel materials, normally produced in every society, enter the environment and cause serious problems. These problems may, to some extent, be reduced by finding applications for them in engineering, for example, they can be used for geotechnical applications as backfill material and solving problems with low shear strength soils. Such materials may be subjected...
متن کاملEffects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar
Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...
متن کاملRock Brittleness Prediction Using Geomechanical Properties of Hamekasi Limestone: Regression and Artificial Neural Networks Analysis
The cold climate is a favorable parameter for the development of tension cracks and decrease of rock brittleness. Therefore, this paper attempts to investigate the Hamekasi porous limestone in order to predict the brittleness indices during freeze-thaw cycles. The freeze–thaw test was executed for one cycle including 16 h of freezing, and 8 h of thawing. The geo mechanical properties and brittl...
متن کاملFABRICATION AND EVALUATION OF PHYSICALLY CROSSLINKED STIMULI SENSITIVE POLYMERIC BLEND OF PVA-GELATIN AS DRUG DELIVERY SYSTEM BY FREEZE THAW CYCLES
Vacuum dried Metronidazole hydrochloride (MTZ) loaded Crosslinked polymeric blend of Poly(vinyl)alcohol (PVA) and Gelatin(GE) in different ratios by 30 freeze/thaw cycles (FTC) tested for stimuli sensitivity and crosslinking at various pH, temperature, ionic concentration and oscillatory test along with dye absorption test showed maximum swelling in alkaline pH and decreased swelling with incre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002