The Development at Cranfield of a Free Piston Compression Shock Tube
نویسنده
چکیده
SUMMARY The free piston compreeslon shock tube provIdea a simple means of obtaining shock Mach numbers of the order of 30. This paper concerns the design and development at Cranfteld of such a shock tube. The problem6 encountered in evolving a pwton capable of withstanding heavy impacts at the completion of 50s stroke are outlined, and some preliminary shock tube perfonnanoe data given.
منابع مشابه
Heat transfer during transient compression: measurements and simulations
Experiments have been performed to assess the utility of unsteady one-dimensional heat conduction modelling for the calculation of heat losses during a free piston compression process. Heat transfer measurements have been obtained within a gun tunnel barrel using surface junction thermocouple instrumentation. The gun tunnel was operated with a relatively heavy piston such that the shock waves i...
متن کاملPD Compression: A Quasi-Static or Dynamic Process?
Gas compression in a positive displacement (PD) type piston engine, or piston compressor, has long been modeled as a quasi-static process in which the piston is assumed to move infinitely slow inside a cylinder. The gas compression mechanism is therefore regarded as being governed by the basic thermodynamic principles. Energy transfer is accomplished quasi-statically with a piston reducing the ...
متن کاملA Long Stroke Isentropic Free Piston
SUMMARY The application of a long stroke isentropic free piston compressor as the energy source for an intermittent M = 6.85 hypersonic wind tunnel is described. The advantages of comparatively long running times of up to 0.5 s and uniform reservoir conditions at up to 90 bar and 600 K are discussed. Particular problems arising from the long stroke compression associated with both viscous flow ...
متن کاملExperimental and Numerical Simulation Investigation on Crushing Response of Foam-Filled Conical Tubes Stiffened with Annular Rings
In this paper, crashworthiness characteristics of conical steel tubes stiffened by annular rings and rigid polyurethane foam are investigated. For this purpose, wide circumferential rings are created from the outer surface of the conical tube at some determined areas along tube length. In fact, this method divides a long conical tube into several tubes of shorter length. When this structure is ...
متن کاملInvestigation of the effect of piston geometrical parameters on RCCI engine performance based on second law of thermodynamic
The reactivity controlled compression ignition engines have high thermal efficiency and low exhaust emission of nitrogen oxides and soot because of low temperature combustion. In this type of engines, low reactivity fuel is injected to air through intake port and high reactivity fuel is injected into the combustion chamber during compression stroke. The aim of current study is to investigate th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1967