Modeling of rotational induction heating of nonmagnetic cylindrical billets
نویسندگان
چکیده
Induction heating of nonmagnetic cylindrical billets by rotation in uniform magnetic field produced by static permanent magnets is modeled. Numerical analysis of the process providing the distributions of magnetic and temperature fields is carried out in the monolithic formulation, using our own code based on higher-order finite element method. The methodology is illustrated by a typical example and the most important results are validated experimentally. 2011 Elsevier Inc. All rights reserved.
منابع مشابه
Induction heating of cylindrical nonmagnetic ingots by rotation in static magnetic field generated by permanent magnets
Induction heating of cylindrical nonmagnetic billets by their rotation in static magnetic field is modeled. The magnetic field is produced by a system of appropriately arranged permanent magnets. The numerical model is solved by our own full adaptive higher-order finite element method in a monolithic formulation, i.e., both magnetic and temperature fields are solved simultaneously, respecting t...
متن کاملInternational Scientific Colloquium
Recently the new induction concepts for through heating of aluminium billets before extrusion have been proposed and some installations are under successful operating in industry. The paper is devoted to consider these concepts, their advantages and perspective. The aspect of numerical modeling as a necessary tool to design the induction heating installation is described in the paper and result...
متن کاملFEM modeling of a continuous induction heating process of steel wire hardening
Hardening of steel wires requires heating the wires above their Curie temperature, temperature at which the material becomes nonmagnetic causing a sudden change in the load. This change affects to the induction heating converters and is difficult to be evaluated due to the complexity of the problem and the interdependence of the parameters. In this paper a continuous Post-Curie wire heating mod...
متن کاملInduction Heating of Aluminium Billets with linear motion in a Strong DC Magnetic Field : Magneto - Thermal Analysis in
— This paper presents a new structure of an induction heater for aluminium billets. The device consists in using a strong DC magnetic field created by a superconducting inductor in which the conducting billet is actuated by a linear motion at a constant velocity. The analysis, based on the analytical model for the magnetic field in the billet, has been developed, and then the eddy currents and ...
متن کاملInduction heating of aluminium billets using superconducting coils
It is proposed to apply high-temperature superconducting (HTS) tape in the coil windings for induction heaters for aluminium or copper extrusion billets. The potential for efficiency improvements is substantial, as conventional copper coil induction heaters rated for up to around 1 MW operate with an overall efficiency of typically only 50–60%. The efficiency of a HTS induction heater depends v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied Mathematics and Computation
دوره 219 شماره
صفحات -
تاریخ انتشار 2013