Floquet and transient growth stability analysis of a flow through a compressor passage

نویسندگان

  • G. Rocco
  • T. A. Zaki
  • X. Mao
  • H. Blackburn
  • S. J. Sherwin
چکیده

Article history: Received 10 June 2014 Received in revised form 29 January 2015 Accepted 3 February 2015 Available online 7 February 2015 In this paper we investigate the instabilities arising in a flow through a compressor passage using BiGlobal stability analysis. The adopted geometry comes from the results of previous experimental and numerical investigations on a linear low-pressure (LP) compressor cascade [6,19,20]. Specifically, we address the role of laminar separation of the boundary layers at Re = 138,500, where such separation effects are enhanced by the strong adverse pressure gradients that the flow experiences, in contrast to the more commonly studied low-pressure (LP) turbines. The vortical structures downstream the separation bubble on the suction surface were recognised to show a well-defined time periodicity, which could be precisely detected. Floquet stability analysis was then used to investigate the response of the flow to infinitesimal perturbations. To overcome the difficulty of performing a Floquet stability analysis when the periodicity is restricted just to a small region of the domain, a phase-averaged base flow was computed, such that only the organised motions are extracted, neglecting all the background unsteadiness. The same technique allowed us to confirm the presence of strong energy transient growth phenomena, which are directly associated with convective instabilities occurring in the region downstream from the separation bubble. © 2015 Published by Elsevier Masson SAS.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade- Length Approach in an Axial Compressor

The Rotating-Stall (RS) through a rotor-cascade of an axial compressor were numerically investigated with an unsteady two-dimensional finite-volume density based computer code. To validate the computer code, a test case was prepared and the good agreement of the compared results has given the adequate assurance of the code. The RS was incepted with a 40% reduction in flow coefficient and a 0.4%...

متن کامل

Life Estimate of a Compressor Blade through Fractography

Failure analysis of fractured components provides some information about the causes and conditions of fracture. Fractography is an indispensable part of the failure analysis as it is usually the only means by which the failure mechanism can be established. By using fractography, some information such as component’s life, values of the stress intensity factor and the applied stress can be calcul...

متن کامل

Flow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach

The air-injection as an active flow stabilizing techniques, were numerically examined in current work, during the aerodynamic behavior and the characteristics of an axial compressor. At first, in design condition the characteristic curve was numerically captured for a specified test compressor. The computed results showed good agreements with those obtained from the experiments, to validate the...

متن کامل

Dynamic Stability Analysis of a Beam Excited by a Sequence of Moving Mass Particles

In this paper, the dynamic stability analysis of a simply supported beam carrying a sequence of moving masses is investigated. Many applications such as motion of vehicles or trains on bridges, cranes transporting loads along their span, fluid transfer pipe systems and the barrel of different weapons can be represented as a flexible beam carrying moving masses. The periodical traverse of masses...

متن کامل

Numerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches

An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015