Surface-modified carbon nanotubes catalyze oxidative dehydrogenation of n-butane.
نویسندگان
چکیده
Butenes and butadiene, which are useful intermediates for the synthesis of polymers and other compounds, are synthesized traditionally by oxidative dehydrogenation (ODH) of n-butane over complex metal oxides. Such catalysts require high O2/butane ratios to maintain the activity, which leads to unwanted product oxidation. We show that carbon nanotubes with modified surface functionality efficiently catalyze the oxidative dehydrogenation of n-butane to butenes, especially butadiene. For low O2/butane ratios, a high selectivity to alkenes was achieved for periods as long as 100 hours. This process is mildly catalyzed by ketonic CO groups and occurs via a combination of parallel and sequential oxidation steps. A small amount of phosphorus greatly improved the selectivity by suppressing the combustion of hydrocarbons.
منابع مشابه
Vanadium Oxide Supported on Al-modified Titania Nanotubes for Oxidative Dehydrogenation of Propane
In this study, characterization of vanadia supported on Al-modified titania nanotubes (TiNTs) synthesized by the alkaline hydrothermal treatment of TiO2 powders has been reported. A promising catalyst for oxidative dehydrogenation (ODH) of propane was prepared via the incipient wetness impregnation method. The morphology and crystalline structure of TiNTs were characterized by transmission elec...
متن کاملOxidative dehydrogenation of 1-butene to butadiene over carbon nanotube catalysts
The applications of carbon nanotubes (CNTs) as catalysts have attracted much interests in catalysis community due to their unique porous microstructure and chemical properties. One of the promising results is the use of CNTs in the oxidative dehydrogenation (ODH) of ethylbenzene to styrene [1,2]. However, only few works were reported on the use of CNTs or other carbonaceous materials to catalyz...
متن کاملPorous graphene-based material as an efficient metal free catalyst for the oxidative dehydrogenation of ethylbenzene to styrene.
Reduced porous graphene oxide as a metal free catalyst was selected for the oxidative dehydrogenation of ethylbenzene to styrene. It showed the best catalytic performance compared with other carbon materials (routinely reduced graphene oxide, graphite powder and oxidized carbon nanotubes) and commercial iron oxide.
متن کاملThe Ti3AlC2 MAX Phase as an Efficient Catalyst for Oxidative Dehydrogenation of n‐Butane
Dehydrogenation or oxidative dehydrogenation (ODH) of alkanes to produce alkenes directly from natural gas/shale gas is gaining in importance. Ti3 AlC2 , a MAX phase, which hitherto had not been used in catalysis, efficiently catalyzes the ODH of n-butane to butenes and butadiene, which are important intermediates for the synthesis of polymers and other compounds. The catalyst, which combines b...
متن کاملCarbon-hydrogen bond activation over tungsten carbide catalysts
Tungsten carbides with surface areas ranging from 4 to 39 m2/g were prepared by the temperatureprogrammed carburization of tungsten oxide and nitride powders with pure C H 4 o r a 48.9% CH4 in H 2 mixture. Oxygen uptakes on the carbides were low most likely because of the presence of graphitic carbon at the surface. Nevertheless, the carbides were active and selective for the dehydrogenation of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Science
دوره 322 5898 شماره
صفحات -
تاریخ انتشار 2008