Solar light (hv) and H2O2/hv photo-disinfection of natural alkaline water (pH 8.6) in a compound parabolic collector at different day periods in Sahelian region.

نویسندگان

  • J Ndounla
  • C Pulgarin
چکیده

The photo-disinfection of natural alkaline surface water (pH 8.6 ± 0.3) for drinking purposes was carried out under solar radiation treatments. The enteric bacteria studied were the wild total coliforms/Escherichia coli (10(4) CFU/ml) and Salmonella spp. (10(4) CFU/ml) naturally present in the water. The photo-disinfection of a 25-l water sample was carried out in a solar compound parabolic collector (CPC) in the absence and in the presence of hydrogen peroxide (H2O2). The addition of H2O2 (10 mg/L) to the sample water was sufficient to enhance the photo-disinfection and ensure an irreversible lethal action on the wild enteric bacteria contents of the sample. The inactivation kinetic of the system was significantly enhanced compared to the one carried out without H2O2 addition. The effect of the solar radiation parameters on the efficiency of the photo-disinfection were assessed. The pH has increased during the treatment in all the photo-disinfection processes (hv and H2O2/hv). The Salmonella spp strain has shown the best effective inactivate time in alkaline water than the one recorded under acidic or near-neutral conditions. The evolution of some physico-chemical parameters of the water (turbidity, NO2(-), NO3(-), NH4(+), HPO4(2-), and bicarbonate (HCO3(-))) was monitored during the treatment. Finally, the possible mechanistic process involved during the enteric bacteria inactivation was suggested.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance Evaluation of Nanofluid (Al2O3/H2O-C2H6O2) Based Parabolic Solar Collector Using Both Experimental and CFD Techniques

The present work evaluates the performance of solar collector using Al2O3-C2H6O2-H2O nanofluid as a working fluid through both experimental and CFD analysis. Ethylene-glycol water mixture (40:60 v/v) is used as base fluid, where α-Al2O3 nanoparticle of 20 nm average size is dispersed for the preparation of nanofluid of four different volumetric concentration (vol. conc.) of 0.05, 0.075, 0.1 and...

متن کامل

Inactivation of Fecal coliforms during solar and photocatalytic disinfection by zinc oxide (ZnO) nanoparticles in compound parabolic concentrators (CPCs)

Water samples of 0, 50, and 100 nephelometric turbidity units (NTU) spiked with fecal coliforms (107 CFU/ml) were exposed to natural sunshine in 1l quartz glass tubes fitted with rectors’ compound parabolic concentrators CPCS at two forms CPC1 (whit nanoparticle zinc oxide) and CPC2(without nanoparticle zinc oxide). The samples were characterized using the X-ray...

متن کامل

Operational trends of a mini parabolic solar collector for agricultural purposes in a non-active solar environment

The mode of operation of mini parabolic solar panels made of germanium, mild steel and aluminium were investigated experimentally, as means of providing heated water on a farmland; the process was also modelled. Angular adjustments of the solar collectors from 70-90o were adopted in order to determine, the best material of construction for the parabolic solar collector and the angular orientati...

متن کامل

Numerical analysis of performance of solar parabolic trough collector with Cu-Water nanofluid

In the present work the effect of Cu-Water nanofluid, as heat transfer fluid, on the performance of a parabolic solar collector was studied numerically. The temperature field, thermal efficiency, mean-outlet temperatures have been evaluated and compared for the conventional parabolic collectors and nanofluid based collectors. Further, the effect of various parameters such as fluid velocity, vol...

متن کامل

Numerical analysis of performance of solar parabolic trough collector with Cu-Water nanofluid

In the present work the effect of Cu-Water nanofluid, as heat transfer fluid, on the performance of a parabolic solar collector was studied numerically. The temperature field, thermal efficiency, mean-outlet temperatures have been evaluated and compared for the conventional parabolic collectors and nanofluid based collectors. Further, the effect of various parameters such as fluid velocity, vol...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Environmental science and pollution research international

دوره 22 21  شماره 

صفحات  -

تاریخ انتشار 2015