Attachment Observability of a Rotating Body-beam
نویسندگان
چکیده
In this article we analyze the admissibility and the exact observability of a body-beam system when the output is taken in a point of attachment from the beam to the body. The single output case chosen here is the practical measurement of the strength, its velocity or its moment. We prove the exact observability for the moment and the admissibility for the other cases. These results are obtained by the spectral properties of rotating body beam system operator and Ingham’s inequalities.
منابع مشابه
Stabilization and Observability of a Rotating Timoshenko Beam Model
A control system describing the dynamics of a rotating Timoshenko beam is considered. We assume that the beam is driven by a control torque at one of its ends, and the other end carries a rigid body as a load. The model considered takes into account the longitudinal, vertical, and shear motions of the beam. For this distributed parameter system, we construct a family of Galerkin approximations ...
متن کاملEffect of Temperature Dependency on Thermoelastic Behavior of Rotating Variable Thickness FGM Cantilever Beam
Thermoelastic behavior of temperature-dependent (TD) and independent (TID) functionally graded variable thickness cantilever beam subjected to mechanical and thermal loadings is studied based on shear deformation theory using a semi-analytical method. Loading is composed of a transverse distributed force, a longitudinal distributed temperature field due to steady-state heat conduction from root...
متن کاملVibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method
This study introduces the Differential Transform Method (DTM) in the analysis of the free vibration response of a rotating closed section composite, Timoshenko beam, which features material coupling between flapwise bending and torsional vibrations due to ply orientation. The governing differential equations of motion are derived using Hamilton’s principle and solved by applying DTM. The natura...
متن کاملThermal Analysis of Laser Hardening for Different Moving Patterns
Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...
متن کاملObservation of the rotational Doppler shift of a white-light, orbital-angular-momentum- carrying beam backscattered from a rotating body
We observe the rotational Doppler shift of an orbital angular momentum (OAM)-carrying white-light beam after it is backscattered from a rotating object. Unlike the well known linear shift, this rotational shift is independent of the optical frequency, and hence each spectral component of the scattered light is shifted by the same value. Consequently, even a white-light source can give rise to a...
متن کامل