Multi-Body Dynamics Analysis of V-Type Diesel Engine Crankshaft
نویسندگان
چکیده
Based on the V-type diesel engine crankshaft system, the paper combined the finite element method (fem) and multi-body dynamics method together, made a virtual simulation analysis. First, by 3d software and finite element software to establish the multi-body dynamic models of the crankshaft, bearing and piston, then simulated the actual engine working condition, and got the data such as crankshaft acceleration, velocity and displacement by the multi-body dynamics simulation analysis. By calculation, the paper found that by using the combination of finite element and multibody simulation method, can we effectively simulate the diesel engine crankshaft dynamics characteristics.
منابع مشابه
Fatigue Analysis and Optimization of Crankshaft of V8 Diesel Engine
The crankshaft is one of the most critically loaded components as it experiences cyclic loads in the form of bending and torsion during its service life. Its failure will cause serious damage to the engine so it’s important at the time of design to verify fatigue strength. More challenges in crankshaft design due to increasing vehicle payloads, lower weight requirement, higher efficiency and lo...
متن کاملThe Analysis of Wheel Loader Diesel Engine Crankshaft Failure
The main purpose of this study is to review the cause for the crankshaft failure of six-cylinder diesel engine of a wheel loader after passing a short period of time. The failure had occurred after 4800 hours of in-service in the fifth crankpin of the crankshaft. Hardness and tensile tests were carried out to study their mechanical properties. Spectrophotometer machine was used to examine the c...
متن کاملFailure Analysis of a Four Cylinder Diesel Engine Crankshaft Made From Nodular Cast Iron
The premature breakage in some four cylinder diesel engine crankshafts was reported. All crankshafts were failed from the same region. Failures had occurred in the first crankpin, the nearest crankpin to the flywheel. Dynamic analysis and finite element modelling were carried out to determine the state of stress in the crankshaft. FEM results revealed that the first crankpin fillet is the most ...
متن کاملAn Experimental Study on Engine Dynamics Model Based In-Cylinder Pressure Estimation
The information provided by the in-cylinder pressure signal is of great importance for modern engine management systems. The obtained information is implemented to improve the control and diagnostics of the combustion process in order to meet the stringent emission regulations and to improve vehicle reliability and drivability. The work presented in this paper covers the experimental study and ...
متن کاملDevelopment of balance shaft and flywheel for single cylinder diesel engine based on analytical approach and comparison with the simulation result
Vibration is a key factor of abrasion and destruction in the internal combustion engine. In internal combustion engines, the main causes of vibration is combustion pressure, connecting rod weight, piston weight and inertial forces. This vibration create corrosion and fracture in main part of engine such as crankshaft, camshaft and cylinder block in long time. This corrosion and fracture is effe...
متن کامل