Corrosion Tests of Steel Earthing Electrodes with Protective Coatings Made from Different Materials
نویسندگان
چکیده
In the paper the methodology and test results of field and laboratory corrosion tests of steel earthing rods with zinc galvanized coatings and copperbonded coatings are described. The corrosion rate and level of corrosion damage of earthing rods with two different protective coatings have been compared as well some conclusions related to reliability and assessment of technical life time of steel earthing rods with protective coatings are formulated.
منابع مشابه
Interpretation of Electrochemical Noise Signals Arising from Symmetrical and Asymmetrical Electrodes Made of Polypyrrole Coated Mild Steel
This article applies the standard deviation of partial signal (SDPS) plots of electrochemical noise (EN) current signals originating from corrosion events on the symmetrical and asymmetrical electrodes made of uncoated and polypyrrole (PPy)-coated mild steel alloy in 4000 ppm NaCl+1000 ppm NaNO2 solution. Signal recording was performed after 30, 60, 90 min and 24 h from immersion...
متن کاملCorrosion of Different Materials in Combustion Chamber of Yellow Phosphorus Tail Gas in Industrial Boiler
About 75% of yellow phosphorus produced in the world is from China, and Yunnan province produces 60% of that in China. Yellow phosphorus is mostly produced by electric furnace from phosphate minerals. Through this method, 2500-3000 Nm/t tail gas is emitted, which causes pollution of the atmosphere. The key composition of the tail gas contains 80%~95%CO. Due to the “3R” principle (reducing, reus...
متن کاملCorrosion Behavior of Detonation Gun Sprayed Fe-Al Type Intermetallic Coating
The detonation gun sprayed Fe-Al type coatings as an alternative for austenitic valve steel, were investigated using two different methods of testing corrosion resistance. High temperature, 10-hour isothermal oxidation experiments at 550, 750, 950 and 1100 °C show differences in the oxidation behavior of Fe-Al type coatings under air atmosphere. The oxide layer ensures satisfying oxidation resi...
متن کاملInfluence of Multiple Coating and Heat Treatment Cycles on the Performance of Nano-TiO2 Coating in Protection of 316L Stainless Steel against Corrosion under UV Illumination and Dark Conditions
In this study nanosized TiO2coatings on the 316L stainless steel substrate were prepared by means of dip-coating technique in which thickness of the coating layer increased byrepeating the coating cycles in two different routes: (I) dipping and drying,respectively, were repeated one, three and five times and finally the dried coated sample was heat treated (single); (II) multiple heat treatment...
متن کاملHydrophobic and superhydrophobic coatings for corrosion protection of steel
Since metals in general, and steels in particular, are vital construction materials in our modern society, the corrosion protection of said materials is of great importance, both to ensure safety and to reduce costs associated to corrosion. Previously, chromium (VI) and other harmful substances were effectively used to provide corrosion protection to steel, but since their use was heavily regul...
متن کامل