Hole-blocking titanium-oxide/silicon heterojunction and its application to photovoltaics

نویسندگان

  • Sushobhan Avasthi
  • William E. McClain
  • Gabriel Man
  • Antoine Kahn
  • Jeffrey Schwartz
  • James C. Sturm
چکیده

In contrast to the numerous reports on narrow-bandgap heterojunctions on silicon, such as strained Si1 xGex on silicon, there have been very few accounts of wide-bandgap semiconducting heterojunctions on silicon. Here, we present a wide-bandgap heterojunction—between titanium oxide and crystalline silicon—where the titanium oxide is deposited via a metal-organic chemical vapor deposition process at substrate temperatures of only 80–100 C. The deposited films are conformal and smooth at the nanometer scale. Electrically, the TiO2/Si heterojunction prevents transport of holes while allowing transport of electrons. This selective carrier blocking is used to demonstrate a low-temperature processed silicon solar cell. VC 2013 AIP Publishing LLC [http://dx.doi.org/10.1063/1.4803446]

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Titanium dioxide/silicon hole-blocking selective contact to enable double- heterojunction crystalline silicon-based solar cell

Articles you may be interested in High efficiency sequentially vapor grown n-i-p CH3NH3PbI3 perovskite solar cells with undoped P3HT as p-type heterojunction layer Carrier recombination losses in inverted polymer: Fullerene solar cells with ZnO hole-blocking layer from transient photovoltage and impedance spectroscopy techniques High efficiency double heterojunction polymer photovoltaic cells u...

متن کامل

Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?a)

Articles you may be interested in Titanium dioxide/silicon hole-blocking selective contact to enable double-heterojunction crystalline silicon-based solar cell Appl. High efficiency sequentially vapor grown n-i-p CH3NH3PbI3 perovskite solar cells with undoped P3HT as p-type heterojunction layer Parameters influencing the deposition of methylammonium lead halide iodide in hole conductor free per...

متن کامل

Carbon nanotubes grown on In2O3:Sn glass as large area electrodes for organic photovoltaics

The authors report the growth of multiwall carbon nanotubes directly onto indium tin oxide glass via chemical vapor deposition as large area semitransparent electrodes for organic solar cell applications. The rate of nanotube growth on this ternary oxide is greatly reduced as compared to that of silicon dioxide and glass substrates enabling a high degree of control over nanotube height. The str...

متن کامل

Low-Temperature, Chemically Grown Titanium Oxide Thin Films with a High Hole Tunneling Rate for Si Solar Cells

In this paper, we propose a chemically grown titanium oxide (TiO2) on Si to form a heterojunction for photovoltaic devices. The chemically grown TiO2 does not block hole transport. Ultraviolet photoemission spectroscopy was used to study the band alignment. A substantial band offset at the TiO2/Si interface was observed. X-ray photoemission spectroscopy (XPS) revealed that the chemically grown ...

متن کامل

Interaction at the silicon/transition metal oxide heterojunction interface and its effect on the photovoltaic performance.

The interfacial reaction and energy level alignment at the Si/transition metal oxide (TMO, including MoO3-x, V2O5-x, WO3-x) heterojunction are systematically investigated. We confirm that the interfacial reaction appears during the thermal deposition of TMO, with the reaction extent increasing from MoO3-x, to V2O5-x, and to WO3-x. The reaction causes the surface oxidation of silicon for faster ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013