Design and Analyze the Optimum Operating Point between Magnetic Flux Density and Vibration Noise of Transformer Cores
نویسندگان
چکیده
Base on the magnetization and magnetostriction measurement, this paper proposed a generalized 3D finite element numerical model, which can be used to analyze electromagnetic vibration of laminated cores including electromagnetism and magnetostriction effects. And then the acoustic field around the transformer was analyzed and tested, the results showed the model and analysis method were feasible. The work is helpful to estimate vibration noise level and then optimized design, choose suitable silicon steel and size in the design stage, which can reduce product development cycle and test cost.
منابع مشابه
Nonlinear Model of Tape Wound Core Transformers
Recently, tape wound cores due to their excellent magnetic properties, are widely used in different types of transformers. Performance prediction of these transformers needs an accurate model with ability to determine flux distribution within the core and magnetic loss. Spiral structure of tape wound cores affects the flux distribution and always cause complication of analysis. In this paper, a...
متن کاملModelling transformer core joints using Gaussian models for the magnetic flux density and permeability
Simple equivalent permeability and reluctance models are obtained for the transformer core joints from the analysis of the magnetic flux. It is shown that the flux variations in the joint zone can be fitted with simple Gaussian expressions suitable for transformer design purposes. These models are derived from 2D and 3D finite element simulations. The magnetic flux distribution in the transform...
متن کاملComparative Harmonic Loss Measurement of Grain Oriented and Non-oriented Magnetic Sheets Using a High Precision Single Sheet Tester
Abstract: Local flux may be distorted in many regions of core, although total flux is usually sinusoidal. When attempting to predict the loss distribution in materials operating under localized distorted flux conditions, which occur in machines and transformer cores, it is essential that proper account of the waveform be taken. Moreover for development of new magnetic materials and generation ...
متن کاملOptimum Design of a High-Power, High-Frequency Transformer - Power Electronics, IEEE Transactions on
A procedure for optimum design of a high-power, high-frequency transformer is PresentedThe Procedure is based on both electrical and thermal processes in the transformer and identifies a) the VA-rating of ferrite cores in relation to the operating frequency, , , ) the optimum flux density in the core, and c) the optimum current densities of the windings providing maximum transformer efficiency....
متن کاملEffects of DC Magnetic Bias on the Magnetic and Sound Fields of Transformer
DC bias current flowing into the neutral point of power transformer will seriously affect the normal operation of AC power system. In this paper, exciting current, harmonic component of the excitation current, magnetic flux density and noise of transformer were analyzed when the transformer is in the no-load operation state based on field-circuit coupled method. Through the calculation and anal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015