Active Balancing and Vibration Control of Rotating Machinery: A Survey
نویسندگان
چکیده
Vibration suppression of rotating machinery is an important engineering problem. In this paper, a review of the research work performed in real-time active balancing and active vibration control for rotating machinery, as well as the research work on dynamic modeling and analysis techniques of rotor systems, is presented. The basic methodology and a brief assessment of major difficulties and future research needs are also provided.
منابع مشابه
Study on online active balancing system of rotating machinery and target control method
In order to reduce the unbalance vibration of the rotating machinery automatically during the work process, a new type of liquid-transfer active balancing system was proposed. In the system, a balancing disc divided into four liquid storage chambers was mounted on the rotor. When the unbalance response of the rotating machinery was higher than the limiting value, compressed air was injected to ...
متن کاملCALCULATION OF TUNING PARAMETERS FOR VIBRATION CONTROL USING LabVIEW
Vibration control of rotating machinery is tougher and a challenging challengerical technical problem. There are two major categories of vibration control techniques for rotating machinery such as direct control using vibration isolators and balancing control using vibration dampers. This chapter presents the simulation of a PID control scheme and calculation of tuning parameters. These paramet...
متن کاملAuto-Tuning Adaptive Supervisory Control of Single-Plane Active Balancing Systems
Adaptive influence-coefficient methods have proven successful at controlling unbalance-induced vibration of rotating machinery without requiring a priori knowledge of machine dynamics. If initial influence estimates are inaccurate, however, vibration may become worse temporarily before the estimation converges. An auto-tuning method is presented here that adjusts adaptive “gain” parameters duri...
متن کاملOptimal One-plane Active Balancing of a Rigid Rotor during Acceleration
Rotating machinery, including machining spindles, industrial turbomachinery, and aircraft gas turbine engines, are very commonly used in industry. One major problem faced by these machineries is the harmful, imbalance-induced vibration. Many methods have been developed to reduce this vibration: o!-line balancing methods [1], on-line active balancing methods using mass redistribution devices [2}...
متن کاملA new two dimensional inverse Laplace transform algorithm using analytic expressions for the gradient and the Hessian matrix,
Increased running speeds and the requirement for rotating machinery to operate within specified levels of vibration mean that the control of machinery vibration is essential in today’s industry. In this work, the flexible rotor balancing problem based on the influence coefficient method and holospectrum technique is formulated as a minimax optimization problem. This formulation can solve the mi...
متن کامل