Stochastic Analysis of Fatigue Crack Growth
نویسندگان
چکیده
Due to cost and time limitations, experiments for fatigue crack growth are only feasible below certain cycle numbers. In this paper, it is investigated whether or not fatigue crack growth laws allow for an extrapolation of the statistics of the cycle number to reach a certain crack length from limited experimental data, and hence reduce costs.
منابع مشابه
A development in the finite volume method for the crack growth analysis without global remeshing
Crack growth analysis has remained one of the challenging problems in the fracture mechanics of structures. On the other hand, the fatigue crack growth is a common phenomenon in the components of structures like airplanes, navies and fluid storages where the fracture due to crack should be considered in the design of these structures. In this paper, the finite volume method (FVM) is extended fo...
متن کاملExperimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کاملEffects of randomness of grain boundary resistance on fatigue initiation life
In the framework of crack number density analysis, a theoretical investigation is carried out on the relationship between the statistical characteristics of fatigue initiation life and the stochastic growth of short fatigue cracks. The numerical results indicate that, compared with the influence of grain boundary resistance, the effect of the degree of randomness of crystallographic crack growt...
متن کاملPredicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections
This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...
متن کاملCHARACTERIZATION OF TRANSVERSE CRACK AND CRACK GROWTH IN A RAILWAY RAIL
Abstract: To ensure the rail transportations safety, evaluation of fatigue behavior of the rail steel is necessary. High cycle fatigue behaviour of a rail steel was the subject of investigation in this research using fracture mechanics. Finite element method (FEM) was used for analyzing the distribution of the stresses on the rail, exerted by the external load. FEM analysis showed that the ...
متن کامل