Temperature dependent lattice misfit and coherency of Al 3 X ( X = Sc , Zr , Ti and Nb ) particles in an Al matrix

نویسندگان

  • Saumitra Saha
  • T. Z. Todorova
  • J. W. Zwanziger
چکیده

The lattice coherency and critical radii for Al3X precipitates in an aluminum matrix were computed using firstprinciples methods. From density functional perturbation theory and the quasi-harmonic approximation, the unit cell parameters as a function of temperature were determined for Al3Sc, Al3Zr, Al3Ti, and Al3Nb in the L12 structure, and for Al3Ti and Al3Nb in their more stable DO22 structures. From these data the lattice misfit and critical radii were determined. It was found that Al3Sc and Al3Zr behave similarly, with increasing critical radii and decreasing misfit as a function of temperature, while Al3Ti and Al3Nb behaved oppositely. Furthermore, the DO22 phases showed uniformly poor lattice coherence and very small critical radii. Superior alloy properties in Al/Al3X systems are suggested to require stabilization of the L12 phase in the precipitated particles.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Atom probe tomographic studies of precipitation in Al-0.1Zr-0.1Ti (at.%) alloys.

Atom probe tomography was utilized to measure directly the chemical compositions of Al(3)(Zr(1)-(x)Ti(x)) precipitates with a metastable L1(2) structure formed in Al-0.1Zr-0.1Ti (at.%) alloys upon aging at 375 degrees C or 425 degrees C. The alloys exhibit an inhomogeneous distribution of Al(3)(Zr(1)-(x)Ti(x)) precipitates, as a result of a nonuniform dendritic distribution of solute atoms afte...

متن کامل

Microstructure and Grain Refining Performance of a New Al-Ti-C Master Alloy (RESEARCH NOTE)

Control of microstructure parameters that affecting the Al-Ti-C master alloys grain refining efficiency is leading to improve the aluminum grain refinement. This study was an attempt to produce Al-Ti-C master alloys that provide these controlling factors with relying on the solute effect theory. The produced master alloys were examined by using scanning electron microscopy (SEM), energy-dispers...

متن کامل

THERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS

Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...

متن کامل

MICROSTRUCTURE STUDY ON AL-5%SiC NANOCOMPOSITE POWDERS

Abstract: In this study Al-5 (Vol) % SiCp nanocomposite powder has been successfully synthesized by high-energy planetary milling of Al and SiC powders for a period of 25 h at a ball-to-powder ratio of 15:1. The changes of the lattice strain, the crystallite size of the matrix phase, and the nanocomposite powder microstructure with time have been investigated by X-ray diffraction (XRD), X-ray m...

متن کامل

The effect of mechanical activation on the kinetic and formation mechanism of a niobium aluminide based nanocomposite

In this paper the feasibility of NbAl3/Al2O3 nanocomposite formation through mechanochemical reaction between Al and Nb2O5 and the effect of mechanical activation on the kinetic and reaction mechanism were investigated. Structural and phase evolution during mechanical alloying were studied by employing transmission electron microscopy (TEM)...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015