Analysis of Crosstalk between Single-ended and Differential Lines

نویسندگان

  • F. Xiao
  • R. Hashimoto
  • K. Murano
  • Y. Kami
چکیده

The crosstalk between single-ended and differential lines is investigated in this paper. First, the telegraphers equations for multiconductor line are applied. Then the differential pair is terminated respectively with T and Π termination networks, and the crosstalk from the single-ended trace to the differential pair is evaluated at the grounded resistors in the T or Π termination networks. The analysis of the crosstalk is obtained by incorporating the termination network with the solution of the telegraphers equations that are solved by using a mode decomposition technique. DOI: 10.2529/PIERS060904050207

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Crosstalk Coupling: Single-Ended vs. Differential

The paper begins with four propositions. 1), the effects of crosstalk coupling decrease with trace separation. 2), crosstalk coupled to a differential pair has meaning only for the differential component of the crosstalk on the differential pair, not the common mode component of the crosstalk. A differential component only exists because the outside trace is (perhaps only slightly) further away...

متن کامل

A Practical Guide to Lossy Differential Lines

In recent years differential signaling [1], [2], [1] has made large inroads in high-speed transmission schemes. Estimates are that in a few years almost 100% of all PCB’s will have at least some differential signal paths on them. There are several reasons for this: On one hand having a symmetrical pair of lines carrying opposite signals close to each other greatly reduces electromagnetic emissi...

متن کامل

Mixed-mode S-parameters and Conversion Techniques

Differential signaling in analog circuits is an old technique that has been utilized for more than 50 years. During the last decades, it has also been becoming popular in digital circuit design, when low voltage differential signaling (LVDS) became common in high-speed digital systems. Today LVDS is widely used in advanced electronics such as laptop computers, test and measurement instrument, m...

متن کامل

Comprehensive Evaluation of Crosstalk and Delay Profiles in VLSI Interconnect Structures with Partially Coupled Lines

In this paper, we present a methodology to explore and evaluate the crosstalk noise and the profile of its variations, and the delay of interconnects through investigation of two groups of interconnect structures in nano scale VLSI circuits. The interconnect structures in the first group are considered to be partially coupled identical lines. In this case, by choosing proper values for differen...

متن کامل

A New Multiterminal Fault Location Algorithm Embedded in Line Current Differential Relays

Accurate fault location on transmission lines becomes increasingly beneficial by reducing outage times and allowing faster restoration of scarce power system assets back into service. Having natural access to synchronized remote current data, line current differential protection schemes can incorporate multiterminal fault location algorithms, allowing for more accurate fault location compared w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007