Fracture Toughness and Impact Strength of High-Volume Class-F Fly Ash Concrete Reinforced with Natural San Fibres from Leonardo El J Pract Technol

نویسنده

  • Rafat SIDDIQUE
چکیده

Results of experimental investigation carried out to study the effects of addition of natural san fibres on the fracture toughness and impact strength of high-volume fly ash concrete are presented in this paper. San fibres belong to the category of ‘Natural Bast Fibres’, also known as ‘Sunn Hemp’. Its scientific (botanical) name is Crotalaria Juncea. It is mostly grown in the Indian Sub-Continent, Brazil, Eastern and Southern Africa, and in some parts of the U.S.A. Initially, a control mixture without fly ash was designed. Then, cement was replaced with three percentages (30, 40 and 50%) of low-calcium (Class F) fly ash. Three percentages of san fibres (0.30, 0.60 and 0.90%), having 25 mm length, were used. Tests were performed for compressive strength, fracture toughness, and impact strength at the ages of 28 and 91 days. The test results indicated that the replacement of cement with fly ash decreased the compressive strength and fracture toughness, and had no significant effect on the impact strength of plain (control) concrete. Addition of san fibres did not affect significantly the compressive strength, increased the fracture toughness and impact strength of high-volume fly ash concrete as the percentage of fibres increased. 25 http://lejpt.academicdirect.org Fracture Toughness and Impact Strength of High-Volume Class-F Fly Ash Concrete Reinforced with Natural San Fibres Rafat SIDDIQUE

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of Fibers and Fly Ash on Mechanical Properties of Concrete

The Present study was carried out to evaluate the influence of addition of Fibres and Class ‘C’ Flyash on the mechanical properties of concrete. Fibre Reinforced Concrete (FRC) is very useful in extreme climate where shrinkage of concrete causes cracks. The Fibre Reinforced Flyash concrete (FRFAC) has been successfully used to minimize cavitations / damages in hydraulics structures. The FRC wit...

متن کامل

Generalized Fracture Toughness and Compressive Strength of Sustainable Concrete Including Low Calcium Fly Ash

The paper presents the results of tests on the effect of the low calcium fly ash (LCFA) addition, in the amounts of: 0% (LCFA-00), 20% (LCFA-20) and 30% (LCFA-30) by weight of cement, on fracture processes in structural concretes. In the course of the experiments, compressive strength of concrete and fracture toughness for: I (tensile), II (in-plane shear) and III (anti-plane shear) models of c...

متن کامل

Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers

An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...

متن کامل

Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...

متن کامل

Flexural Toughness of Steel Fiber Reinforced High Performance Concrete Containing Nano-SiO2 and Fly Ash

This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008