Tip Tracking Control of a Single-Link Flexible Robot: A Backstepping Approach

نویسنده

  • G. ZHU
چکیده

In this paper, tip tracking control is investigated for a single-link flexible robot. The flexible beam is first lumped to a spring-mass system, to which the so called backstepping approach is applicable, then two robust controllers and an adaptive controller are developed in the presence of system disturbances/uncertainties. The controllers are rigorously proven to be able to achieve stable tip position and velocity tracking control in the sense of Global Uniform Ultimate Boundedness (GUUB). Numerical simulation results are provided which show that the proposed controllers are effective.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Backstepping Control Design of a Single-Link Flexible Robotic Manipulator

In this paper, the backstepping design scheme is developed for the tip-position trajectory tracking control of single-link flexible robotic manipulator systems. An infinite dimensional dynamic model of a single-link flexible manipulator is derived through the assumed modes method associated with Lagrange approach. For simplicity, a linearized system model would be analyzed and investigated for ...

متن کامل

Nonlinear Stabilizing Controller for a Special Class of Single Link Flexible Joint Robots

Joint flexibility is a very important factor to consider in the controller design for robot manipulators if high performance is expected. Most of the research works on control of flexible-joint robots in literature have ignored the actuator dynamics to avoid complexity in controller design. The problem of designing nonlinear controller for a class of single-link flexible-joint robot manipulator...

متن کامل

Trajectory Tracking Weeled Mobile Robot Using Backstepping Method with Connection off Axle Trailer

The connection of the tractor to the inactive trailer or motor vehicle causes a motion control problem when turning in the screw, forward or backward movements and high speeds. This is due to the inactive trailer being controlled by the tracking using a physical link that is not affected by the movement. Trailers usually take tracks under these conditions. This phenomenon is called Jack Knife. ...

متن کامل

Control of Flexible Link Robot using a Closed Loop Input-Shaping Approach

This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a  vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...

متن کامل

Robust Fractional-order Control of Flexible-Joint Electrically Driven Robots

This paper presents a novel robust fractional PIλ controller design for flexible joint electrically driven robots. Because of using voltage control strategy, the proposed approach is free of problems arising from torque control strategy in the design and implementation. In fact, the motor's current includes the effects of nonlinearities and coupling in the robot manipulator. Therefore, cancella...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1997