High-performance Control of a Pzt Scanner
نویسندگان
چکیده
A piezoelectric tube of the type typically used for actuation in Scanning Tunneling Microscopes (STMs) and Atomic Force Microscopes (AFMs) is considered. Actuation of this piezoelectric tube is hampered by the presence of a lightly damped low frequency resonant mode. This resonant mode is first identified and then damped using a Positive Velocity and Position Feedback (PVPF) controller, a control technique which is proposed in this paper. Inputs are then shaped such that the closed loop system tracks a raster pattern.
منابع مشابه
Micro Fabrication Technology of Ferroelectric Film and its Application to MEMS
Technological problems for realization of Micro Electro-mechanical System (MEMS) are discussed and an introduction of smart materials (PZT) is encouraged. The film formation and micromachining technology are discussed in integration of PZT thin films into MEMS. Further developments are proposed on PZT micro sensors and actuators with special emphasis laid on exploration of new application field...
متن کاملOne-DOF Precision Position Control using the Combined Piezo-VCM Actuator
This paper presents the control performance of a highprecision positioning device using the hybrid actuator composed of a piezoelectric (PZT) actuator and a voice-coil motor (VCM). The combined piezo-VCM actuator features two main characteristics: a large operation range due to long stroke of the VCM, and high precision and heavy load positioning ability due to PZT impact force. A one-degree-of...
متن کاملNested Switching Control Design for Fast PZT Actuated Nanopositioning
This paper studies a new nested switching control (NSC) scheme for piezoelectric (PZT) actuators to achieve fast nanopositioning. Conventional PZT controllers typically neglect the actuator saturation nonlinearity for design simplicity but at the cost of reduced performance. By optimizing a quadratic performance cost function that explicitly involves the actuator saturation, the NSC can not onl...
متن کاملWearable PZT sensors for distributed soft contact sensing (Design and Signal Conditioning Manual)
For any soft wearable device the information about the surrounding environment and interactions is an important performance aspect. A sensor design becomes challenging when the target component has a non-uniform, agile, high resolution, and soft surface. Recent developments in wearable sensor technology have made it possible to embed piezoelectric element (PZT) based sensors, conductive fabrics...
متن کاملValidation and evaluation of a GATE model for MAMMI PET scanner
Introduction:MAMMI is a dedicated PET based on high resolution detectors placed close to the breast. In this study, we presented a GATE model for the simulation of MAMMI scanner and model its performance of the MAMMI based on an adaptation of the NU 4-2008 NEMA standard. Methods:A detailed of geometry MAMMI system that uses scintillation crystals coupled...
متن کامل