Calculation of Physical Properties for Use in Models of Continuous Casting Process-Part 1: Mould Slags
نویسندگان
چکیده
* Corresponding author: E-mail: [email protected] DOI: http://dx.doi.org/10.2355/isijinternational.ISIJINT-2015-364
منابع مشابه
An Investigation on Mold Powders Properties Consumed in Iran
This paper describes the work done between IUST and two Iranian steelworks to evaluate and review the performance of mould fluxes in current use for continuous casting. Calculations have been performed to compare actual values of powder consumption, viscosity and break temperature of the fluxes in current use with required values derived from published empirical rules for casting conditions....
متن کاملThree-dimensional Numerical Simulation of Metal Flow and Solidification in the Multi-cavity Casting Moulds of Automotive Components
The liquid metal flow and the solidification behaviours in a multi-cavity casting mould of two automotive cast parts were simulated in three dimensions. The commercial code, FLOW-3D® was used because it can track the front of the molten metal by a Volume of Fluid (VOF) method and allows complicated parts to be modeled by the Fractional Area/Volume Obstacle Representation (FAVOR) meth...
متن کاملImpact of the Density of the Mould Powder on Thickness of the Layer of Liquid Slag in the Continuous Caster Mould
The demand of highest possible effectiveness is put on all production processes, while the highest quality is demanded from products. These requirements are particularly justifi ed in the steel industry, due to high cost of technical equipment assembly and production cost. In such conditions continuous processes are of signifi cant meaning, since they facilitate maximum utilization of productio...
متن کاملThermal Simulation of Solidification Process in Continuous Casting
In this study, a mathematical model is introduced to simulate the coupled heat transfer equation and Stefan condition occurring in moving boundary problems such as the solidification process in the continuous casting machines. In the continuous casting process, there exists a two-phase Stefan problem with moving boundary. The control-volume finite difference approach together with the boundary ...
متن کاملMathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet
The method of continuous casting of steel is now often used in the metallurgical industry, due to the increasing demand for the production of high – quality steel. An important device of continuous casting machine is the tundish, in which a stabilized steel flow has a crucial effect on the quality and efficiency conditions of the continuous casting process. In this study fluid flows in a six – ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016