Biomechanics of failure modalities in total hip arthroplasty

Total hip arthroplasty (THA) is the treatment of choice to relieve joint pain and loss of mobility as a result of advanced stage osteoarthritis or other hip pathologies. Despite their general success, THAs do fail, with revision rates estimated near 5% per year. Instability, defined as the complete subluxation (dislocation) of the femoral head from the acetabular socket – which usually occurs due to implant impingement – has recently supplanted wear-induced osteolytic aseptic loosening as the leading cause of failure in THA. Soft tissue integrity has long been recognized as influencing joint stability, and therefore there has been great interest recently in improving soft tissue restoration following THA. However, there is little quantitative information related to the degree of soft tissue repair necessary to restore joint stability. Additionally, impingement events, besides their role in prelude to frank dislocation, hold potential to damage newgeneration hard-on-hard bearings, due to the relatively unforgiving nature of the materials and designs. Despite the largely biomechanical nature of these impingement-related complications, they remain under-investigated relative to their burden of morbidity. In addition to impingement, failure modalities unique to hard-on-hard bearings merit careful biomechanical scrutiny. This includes investigation of catastrophic fracture in ceramicon-ceramic bearings, as well as analysis of patient, implant and surgical variables associated with increased wear and adverse soft tissue engagement potential for metalon-metal implants. Toward the goal of improving current biomechanical understanding of failure modalities in THA and to provide an objective basis for orthopaedic surgeons to choose the most favorable implants and to identify optimal intraoperative parameters which minimize failure propensity, a novel, anatomically-grounded finite element (FE) model with hip capsule soft tissue representation was developed. This FE model was used to investigate four principal modes of failure in THA, including dislocation, impingement, fracture mechanics of ceramic implants, and various issues related to failure mechanisms in metal-on-metal implants. The influence of soft tissue integrity and