Evaluation of Preference and Purpose of Utilisation of Cone Beam Computed Tomography (CBCT) Compared to Orthopantomogram (OPG) by Dental Practitioners – A Cross-Sectional Study

نویسندگان

  • Komali Garlapati
  • D.B. Gandhi Babu
  • Nallan C.S.K. Chaitanya
  • Harika Guduru
  • Anusha Rembers
  • Pratima Soni
چکیده

BACKGROUND Cone beam computed tomography (CBCT) has become a reliable adjunctive tool for both diagnosis and treatment planning in the field of dentistry. There are numerous advantages of CBCT over 2D imaging techniques (OPG). There is a need to evaluate the changing trend of preference and purpose of utilisation of these imaging modalities by dental practitioners. This study was carried out to evaluate and compare the purpose and preference of utilisation of CBCT and OPG by various dental practitioners in their clinical practice. MATERIAL/METHODS A retrospective, cross-sectional study was carried out on CBCT and OPG data of 620 different cases treated by different dental practitioners from imaging centres in the twin cities of Telangana (Hyderabad & Secunderabad). For comparisons, we used the Mann-Whitney U test (Z test). RESULTS The analysis of data showed that among the dental practitioners OPG was more commonly ordered by general dentists (31%) followed by prosthodontists (30%), whereas CBCT was more advocated by general dental practitioners (25%) followed by OMFS (23%). OPG preference was greater for fixed partial denture planning (FPD) 59%, whereas CBCT was highly preferred for implant planning 61%. CONCLUSIONS The present study showed that general dentists preferred OPG and CBCT compared to other dental practitioners, and OPG was advocated for FPD planning, whereas CBCT was advocated for implant planning. Moreover, and it was found that there had been a drastic increase in the preference of CBCT over OPG in recent times.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Incidental dentomaxillofacial findings on cone beam computed tomography images of Iranian population

BACKGROUND AND AIM: The present study aimed to assess the nature and prevalence of incidental findings in cone beam computed tomography (CBCT) images of oral and maxillofacial patients. METHODS: In this cross-sectional study, 773 CBCT samples were retrieved from archives of a private oral and maxillofacial radiology center. Any findings that were not related to the reason of CBCT request was re...

متن کامل

Evaluation of Metal Artifacts in Cone Beam Computed Tomography by Metal Supported Porcelain Crowns Using Different FOV and Localizations: An In Vitro Study

Introduction: Metal-supported porcelain crowns (MSPC) and bridge restorations may be present in the mouths of patients undergoing CBCT imaging. Artifacts that are caused by these MSPCs may adversely affect image quality. The aim of this study is to determine the effect of different FOV (field of view) and localization in FOV on metal artifacts caused by MSPC. Methods:</...

متن کامل

Evaluation of Anatomical Variations of Paranasal Sinuses in Cone-beam Computed Tomography (CBCT) of Patients with Chronic Rhinosinusitis in Comparing with Normal Individuals

Introdouction: An exact knowledge of the anatomical variations of the paranasal sinuses (PNS) is critical for surgeons performing endoscopic sinus surgery and for radiologists involved in making preoperative evaluations. An important aspect is the determination of correlation between the anatomical variations of PNS and the presence of chronic rhinosinusitis (CR). Cone-beam computed tomograph...

متن کامل

Artifact reduction techniques in Cone Beam Computed Tomography (CBCT) imaging modality

Introduction: Cone beam computed tomography (CBCT) was introduced and became more common based on its low cost, fast image procedure rate and low radiation dose compared to CT. This imaging modality improved diagnostic and treatment-planning procedures by providing three-dimensional information with greatly reduced level of radiation dose compared to 2D dental imaging modalitie...

متن کامل

Effect of Slice Thickness on the Accuracy of Linear Measurements Made on Cone Beam Computed Tomography Images (InVitro

Objective: Cone beam computed tomography (CBCT) is applied for the imaging of the maxillofacial and dental structures, particularly for surgical treatments and dental implants. The aim of this study was to assess the effect of slice thickness on the accuracy of CBCT linear measurements. Methods: In this diagnostic accuracy study, forty-two titanium pins with the same dimensions were inserted...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 82  شماره 

صفحات  -

تاریخ انتشار 2017