A Survey of Timing Jitter Measurement
نویسندگان
چکیده
The purpose of this paper is to provide robust experimental validations of timing jitter measurements and to derive some applications in the field of Analog-to-Digital Converter (ADC) characterisation. The timing jitter measurements are obtained by use of a recently proposed method, which is based on the use of two ADCs driven by the same input and clock signals.
منابع مشابه
Reference-free, high-resolution measurement method of timing jitter spectra of optical frequency combs
Timing jitter is one of the most important properties of femtosecond mode-locked lasers and optical frequency combs. Accurate measurement of timing jitter power spectral density (PSD) is a critical prerequisite for optimizing overall noise performance and further advancing comb applications both in the time and frequency domains. Commonly used jitter measurement methods require a reference mode...
متن کاملThe Accuracy of Jitter Measurements
Jitter is a variation in a waveform’s timing. The timing variation of the period, duty cycle, frequency, etc. can be measured and compared to an average of multiple periods, or can be measured as a variation from one period to the next. A jitter measurement result will typically consist of a count of the number of periods evaluated over the selected time interval, a measurement of the highest v...
متن کاملNeural Imaging Using Single-Photon Avalanche Diodes
Introduction: This paper analyses the ability of single-photon avalanche diodes (SPADs) for neural imaging. The current trend in the production of SPADs moves toward the minimumdark count rate (DCR) and maximum photon detection probability (PDP). Moreover, the jitter response which is the main measurement characteristic for the timing uncertainty is progressing. Methods: The neural imaging pro...
متن کاملMulti-GHz interface devices should be tested using external test resources
Problem Statement. Everyone will agree that a key issue in the design of multi-GHz interface devices is jitter performance. To characterize jitter performance, do you measure timing jitter or period jitter of the device? Should the Bit Error Rate performance of the device also be tested? Is there any way to shorten the overall test time? And as always, is there a way to reduce the test cost? Fu...
متن کاملUltrafast amplifier additive timing jitter characterization and control.
We report on the characterization and long-term compensation of additive timing jitter introduced by a femtosecond ytterbium regenerative amplifier with a 100 kHz repetition rate. A balanced optical cross-correlation technique is used to generate a jitter error signal. This approach is well suited to characterize the additive timing jitter of Yb amplifiers seeded by narrow spectrum Yb oscillato...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001