Deposition and dissipation of chlorpyrifos in surface water following vineyard applications in northern Italy.
نویسندگان
چکیده
Chlorpyrifos is an insecticide approved globally for use on a wide range of crops. Laboratory studies indicate that chlorpyrifos is toxic to fish and aquatic invertebrates, and so the adoption of practices that reduce aquatic exposure following use should be encouraged. This study assessed the exposure of surface water to the spray-drift of chlorpyrifos and the subsequent contamination of a realistic worst-case edge-of-field ditch in a vineyard in Northern Italy. Chlorpyrifos (DURSBAN 480 EC [Dow Elanco, Indianapolis, IN, USA]) was applied according to local Good Agricultural Practice (GAP) on two vineyard plots using atomizer equipment. Drift deposition and subsequent dissipation of chlorpyrifos were then monitored in an adjacent, common ditch, with an inherent buffer zone of approximately 7 m between the treated area and the ditch. The results showed that the drift loadings under the study conditions could reach predicted levels from standard spray-drift tables. However, the measured drift was highly variable due to physical factors such as the crop canopy and the distribution of vines within the rows. The amount of chlorpyrifos deposited onto the surface of the ditch water and intercepted by paper strips was approximately 2% of the applied amount after the two applications, with a maximum concentration of approximately 0.3 microg L(-1) immediately after the first application and 0.09 microg L(-1) after the second, which then dissipated from the water column within 12 to 24 h. The results showed that drift deposition spatially was variable and that chlorpyrifos residues dissipated rapidly from this surface water body. Both aspects are considered important in order to refine the aquatic risk assessment at a higher tier for both registration and management purposes.
منابع مشابه
بارزسازی فرایند رسوبگذاری در سامانههای پخش سیلاب با استفاده از دادههای تصاویر ماهوارهای LANDSAT، سنجندههای TM و ETM+
Of the applications of remote sensing and satellite images in natural resources is distinguishing and detection of changes in land surface. The image classification using Maximum Likelihood (MLC) is one the prevalent method which is used in a study of the application of TM and ETM+ satellite images to detect sediment deposition on an implemented floodwater spreading scheme. In order to implemen...
متن کاملبارزسازی فرایند رسوبگذاری در سامانههای پخش سیلاب با استفاده از دادههای تصاویر ماهوارهای LANDSAT، سنجندههای TM و ETM+
Of the applications of remote sensing and satellite images in natural resources is distinguishing and detection of changes in land surface. The image classification using Maximum Likelihood (MLC) is one the prevalent method which is used in a study of the application of TM and ETM+ satellite images to detect sediment deposition on an implemented floodwater spreading scheme. In order to implemen...
متن کاملBehavioral responses of Nile tilapia (Oreochromis niloticus) by sublethal exposure to chlorpyrifos: a case study in Twin Lakes of West Sumatra
Background: The most commonly used insecticide by 99.8% farmers in West Sumatra, is chlorpyrifos which contains organophosphates. Chlorpyrifos is used to kill insects and other pests and works as the contact poison, gastric toxins, and inhalation. It is very useful for farmers in keeping the plants such as corn, citrus, peanuts, and so forth. Chlorpyrifos can enter the water body with direct a...
متن کاملPhotodegradation of Insecticide Chlorpyrifos in Aqueous Solution under Simulated Solar Light Irradiation Conditions using Babolrood River Water
Chlorpyrifos is an organophosphate insecticide, used to control foliage and soil-borne insect pests on a variety of food and feed crops. In the natural environment, Chlorpyrifos can be degraded through several possible processes, including photodegradation, biodegradation, and hydrolysis. In the present work the photodegradation and environmental fate of Chlorpyrifos in aqueo...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Environmental toxicology and chemistry
دوره 24 4 شماره
صفحات -
تاریخ انتشار 2005