Nonlinear Thermal Expansion Model for SiC/Al
نویسندگان
چکیده
The thermal expansion behaviour of silicon carbide (SCS-2) fibre reinforced 6061 aluminium matrix composite subjected to the influenced thermal mechanical cycling (TMC) process were investigated. The thermal stress has important effect on the longitudinal thermal expansion coefficient of the composites. The present paper used experimental data of the thermal expansion behaviour of a SiC/Al composite for temperatures up to 370 , in which their data was used for carrying out modelling of theoretical predictions. Keywords—Nonlinear, thermal, fibre reinforced, metal matrix composites
منابع مشابه
INVESTIGATION ON THERMAL PROPERTIES OF Al/SiCp METAL MATRIX COMPOSITE BASED ON FEM ANALYSIS
Computational simulations on the thermal analysis of metal matrix composite (MMC) composed of Al and SiC were performed in extended areas of SiC volume fraction. Due to the experimental limitations, only the narrow range of SiC volume fraction has been examined. Through the simulation, which enables current experimental situation to extend, we attempted to explore the dependencies of thermal an...
متن کاملبررسی تأثیر فرآیند اکستروژن بر ریزساختار و استحکام کامپوزیت Al6061-SiC
Al-SiC composites are among the most demanding metal matrix composites due to their excellent strength, good ductility, good corrosion resistance, low coefficient of thermal expansion and reasonable price. Manufacturing of cast metal matrix composites usually involves some problems such as inhomogeneous distribution of the particles due to poor wetability of ceramics to molten alloys, porosity ...
متن کاملModelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles
The coefficient of thermal expansion (CTE) is one of the most important physical properties of metal matrix composites (MMCs). The thermal expansion response is correlated to the microstructure, the deformation of the matrix, and the internal stress conditions. In the present study the physical CTE of aluminium matrix composite (AMC) reinforced with 70 vol. % SiC particles is analytically compu...
متن کاملThermal Expansion Behavior of Hot-Pressed Engineered Matrices
Advanced engineered matrix composites (EMCs) require that the coefficient of thermal expansion (CTE) of the engineered matrix (EM) matches those of the fiber reinforcements as closely as possible in order to reduce thermal compatibility strains during heating and cooling of the composites. The present paper proposes a general concept for designing suitable matrices for long fiber reinforced com...
متن کاملThermal shock and oxidation resistant gradient coating based on yttrium silicate for C/SiC composite
Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...
متن کامل