Stress Distribution around a Hole in an Ellipsoidal Shell*
نویسندگان
چکیده
This paper treats the stress distribution in an ellipsoidal shell of revolution with a hole. The problem is reduced to the solution of sets of eight simultaneous equations. If interest is restricted to the neighborhood of the hole, a simplification occurs requiring the solution of sets of four simultaneous equations.
منابع مشابه
Optimization of infinite composite plates with quasi-triangular holes under in-plane loading
This study used particle swarm optimization (PSO) to determine the optimal values of effective design variables acting on the stress distribution around a quasi-triangular hole in an infinite orthotropic plate. These parameters were load angle, hole orientation, bluntness, fiber angle, and material properties, which were ascertained on the basis of an analytical method used by Lekhnitskii [3]. ...
متن کاملStudy of The Effect of Hole Location on Stress Analysis of a Plate Subjected to Uni-axial Load by Using Numerical and Exact Solution
In the present study, stress analysis and explicit solution of rectangular plate with arbitrarily located circular hole, subjected to linear normal stresses on two opposite edges, has been investigated. Airy function and hoop stresses occurring at the edge of the circular have been computed. In this method 2D dimension elasticity and Airy stress function was used. The present method for explici...
متن کاملFinite Plate with Circular and Square Hole under Partial Loading
In this paper a general analytical solution is obtained to find stress distribution in a finite elastic plate with a circular or square hole subjected to arbitrary biaxial partial loading using modified boundary condition by assuming plane stress conditions. The method employed is based on solution of circular hole in finite rectangular plate. This plate is mapped to circular ones and the parti...
متن کاملDetermination of Optimal Parameters for Finite Plates with a Quasi-Square Hole
This paper aims at optimizing the parameters involved in stress analysis of perforated plates, in order to achieve the least amount of stress around the square-shaped holes located in a finite isotropic plate using metaheuristic optimization algorithms. Metaheuristics may be classified into three main classes: evolutionary, physics-based, and swarm intelligence algorithms. This research uses Ge...
متن کاملStress Concentration Factor in a Functionally Graded Material Plate around a Hole
Stress concentration factors have been examined in a functionally graded material (FGM) plate with central holes in different shapes in this essay. The material properties change along the thickness of plate. ABAQUS software has been utilized for modeling of problem in which subroutine of ABAQUS sub-program was used for modeling of the targeted material. The considering shapes for hole in plate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016