LiMnPO4 nanoplate grown via solid-state reaction in molten hydrocarbon for Li-ion battery cathode.

نویسندگان

  • Daiwon Choi
  • Donghai Wang
  • In-Tae Bae
  • Jie Xiao
  • Zimin Nie
  • Wei Wang
  • Vilayanur V Viswanathan
  • Yun Jung Lee
  • Ji-Guang Zhang
  • Gordon L Graff
  • Zhenguo Yang
  • Jun Liu
چکیده

Electrochemically active LiMnPO(4) nanoplates have been synthesized via a novel, single-step, solid-state reaction in molten hydrocarbon. The olivine-structured LiMnPO(4) nanoplates with a thickness of approximately 50 nm appear porous and were formed as nanocrystals were assembled and grew into nanorods along the [010] direction in the (100) plane. After carbon coating, the prepared LiMnPO(4) cathode demonstrated a flat potential at 4.1 V versus Li with a specific capacity reaching as high as 168 mAh/g under a galvanostatic charging/discharging mode, along with an excellent cyclability.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery

Lithium iron orthosilicate (Li2FeSiO4) with Pmn21 space group is theoritically investigated as a chathode material of Li-ion batteries using density functional theory (DFT) calculations. PBE-GGA (+USIC), WC-GGA, L(S)DA (+USIC) and mBJ+LDA(GGA) methods under spin-polarization ferromagnetic (FM) and anti-ferromagnetic (AFM) procedure are used to investigate the material properties, includin...

متن کامل

Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery

Lithium-iron-orthosilicate is one of the most promising cathode materials for Li-ion batteries due to its safety, environmental brightness and potentially low cost. In order to produce a low cost cathode material, Li2FeSiO4/C samples are synthesized via sol-gel (SG; one sample) and solid state (SS; two samples with different carbon content), starting from Fe (III) in the raw materials (lo...

متن کامل

LiCoPO4 cathode from a CoHPO4·xH2O nanoplate precursor for high voltage Li-ion batteries

A highly crystalline LiCoPO4/C cathode material has been synthesized without noticeable impurities via a single step solid-state reaction using CoHPO4·xH2O nanoplate as a precursor obtained by a simple precipitation route. The LiCoPO4/C cathode delivered a specific capacity of 125 mAhg(-1) at a charge/discharge rate of C/10. The nanoplate precursor and final LiCoPO4/C cathode have been characte...

متن کامل

Carbonate anions controlled morphological evolution of LiMnPO4 crystals.

LiMnPO4 with a morphology controlled by carbonate anions was prepared via a simple template-free hydrothermal reaction; the LiMnPO4 shows a promising electrochemical activity as cathode material for lithium ion batteries.

متن کامل

Synthesis and Characterization of LiMnPO4/Carbon Nanocomposite Material as Cathode Material

Development of an eco-friendly, low cost and high energy density LiMnPO4 cathode material has attracted much attention due to its high operating voltage vs. Li falling within the electrochemical stability window of conventional electrolyte solutions and offers more safety features due to the presence of a strong P-O covalent bond.Synthesis of battery materials integrates the...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nano letters

دوره 10 8  شماره 

صفحات  -

تاریخ انتشار 2010