Fuzzy FES controller using cycle-to-cycle control for repetitive movement training in motor rehabilitation. Experimental tests with wireless system.
نویسندگان
چکیده
A prototype of wireless surface electrical stimulation system combined with the fuzzy FES controller was developed for rehabilitation training with functional electrical stimulation (FES). The developed FES system has three features for rehabilitation training: small-sized electrical stimulator for surface FES, wireless connection between controller and stimulators, and between controller and sensors, and the fuzzy FES controller based on the cycle-to-cycle control for repetitive training. The developed stimulator could generate monophasic or biphasic high voltage stimulus pulse and could output stimulation pulses continuously more than 20 hours with 4 AAA batteries. The developed system was examined with neurologically intact subjects and hemiplegic subjects in knee joint control. The maximum knee joint angle was controlled by regulating burst duration of stimulation pulses by the fuzzy controller. In the results of two experiments of knee extension angle control and knee flexion and extension angle control, the maximum angles reached their targets within small number of cycles and were controlled stably in the stimulation cycles after reaching the target. The fuzzy FES controller based on the cycle-to-cycle control worked effectively to reach the target angle and to compensate difference in muscle properties between subjects. The developed wireless surface FES system would be practical in clinical applications of repetitive execution of similar movements of the limbs for motor rehabilitation with FES.
منابع مشابه
Functional Electrical Stimulation (FES) Control for Restoration and Rehabilitation of Motor Function
Functional electrical stimulation (FES) has been studied and clinically applied to restoring or assisting motor functions lost due to spinal cord injury or cerebrovascular disease. Electrical stimulation without control of functional movements is also used for therapy or in rehabilitation training. In recent years, one of the main focuses of FES studies has been its application for rehabilitati...
متن کاملA Feasibility Study of Fuzzy FES Controller Based on Cycle-to-Cycle Control: An Experimental Test of Knee Extension Control
Functional Electrical Stimulation (FES) can be effective in assisting or restoring paralyzed motor functions. The purpose of this study is to examine experimentally the fuzzy controller based on cycle-to-cycle control for FES-induced gait. A basic experimental test was performed on controlling maximum knee extension angle with normal subjects. In most of control trials, the joint angle was cont...
متن کاملHuman Gait Control Using Functional Electrical Stimulation Based on Controlling the Shank Dynamics
Introduction: Efficient gait control using Functional Electrical Stimulation (FES) is an open research problem. In this research, a new intermittent controller has been designed to control the human shank movement dynamics during gait. Methods: In this approach, first, the three-dimensional phase space was constructed using the human shank movement data recorded from the healthy subjects. Then...
متن کاملDesign and Implementation of a Control System for a DC Servomechanism with an Internal Dither Created by a Limit Cycle
Purpose of this paper is designing of a positional angle control system for a DC servomechanism. The servomechanism system consists of a direct current (DC) motor, a motor driver, a measuring sensor, and a control board to adjust angular position. The motor in the servomechanism has a non-linear element called dead-zone. Presence of dead-zone causes the nonlinear behavior of system. Injecting a...
متن کاملFuzzy PD Cascade Controller Design for Ball and Beam System Based on an Improved ARO Technique
The ball and beam system is one of the most popular laboratory setups for control education. In this paper, we design a fuzzy PD cascade controller for a ball and beam system using Asexual Reproduction Optimization (ARO) technique. The ball & beam system consists of a servo motor, a grooved beam, and a rolling ball. This system utilizes a servo motor to control ball’s position on the beam. Chan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of medical engineering & technology
دوره 35 6-7 شماره
صفحات -
تاریخ انتشار 2011