Monitoring changes in behaviour from multi-sensor systems
نویسندگان
چکیده
Behavioural patterns are important indicators of health status in a number of conditions and changes in behaviour can often indicate a change in health status. Currently, limited behaviour monitoring is carried out using paper-based assessment techniques. As technology becomes more prevalent and low-cost, there is an increasing movement towards automated behaviour-monitoring systems. These systems typically make use of a multi-sensor environment to gather data. Large data volumes are produced in this way, which poses a significant problem in terms of extracting useful indicators. Presented is a novel method for detecting behavioural patterns and calculating a metric for quantifying behavioural change in multi-sensor environments. The data analysis method is shown and an experimental validation of the method is presented which shows that it is possible to detect the difference between weekdays and weekend days. Two participants are analysed, with different sensor configurations and test environments and in both cases, the results show that the behavioural change metric for weekdays and weekend days is significantly different at 95% confidence level, using the methods presented.
منابع مشابه
Potentiometric Method to Determine Montelukast Sodium in its Tablets with In-line Monitoring of its Dissolution Behaviour
Direct drug determination without any pervious treatment steps is the most environmentally friendly method of analysis. Traditional analysis methods usually involve a pre-treatment step before analysis and this consumes time and organic solvents. This work describes direct potentiometric method by using ion selective electrode to determine Montelukast Sodium in its pure drug substance and in ta...
متن کاملDesign of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...
متن کاملDETERMINATION OF SENSOR LOCATIONS FOR MONITORING OF ORCHARDS PARAMETERS USING REMOTE SENSING AND GIS
Optimal management of the farm and increasing production efficiency can be achieved by collecting accurate and appropriate information from the fields. The aim of this study is to determine the location of soil moisture sensors in pistachio orchards. For this purpose, initial information was obtained using satellite image processing. Then, using clustering method the information was clustered t...
متن کاملDevelopment of hardware system using temperature and vibration maintenance models integration concepts for conventional machines monitoring: a case study
This article describes the integration of temperature and vibration models for maintenance monitoring of conventional machinery parts in which their optimal and best functionalities are affected by abnormal changes in temperature and vibration values thereby resulting in machine failures, machines breakdown, poor quality of products, inability to meeting customers’ demand, poor inventory contro...
متن کاملDecentralized and Cooperative Multi-Sensor Multi-Target Tracking With Asynchronous Bearing Measurements
Bearings only tracking is a challenging issue with many applications in military and commercial areas. In distributed multi-sensor multi-target bearings only tracking, sensors are far from each other, but are exchanging data using telecommunication equipment. In addition to the general benefits of distributed systems, this tracking system has another important advantage: if the sensors are suff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 1 شماره
صفحات -
تاریخ انتشار 2014