A LOW-POWER DOUBLE BALANCED OSCILLATOR MIXER DESIGN IN 90nm CMOS TECHNOLOGY

نویسندگان

  • Satish Reddy
  • Satheesh Kumar
چکیده

CMOS Scaling technologies are the main caused for great impact on Analog design. The most severe affect is the reduction in the voltage supply. A double balanced down conversion oscillator mixer using 90 nm CMOS technology is proposed in this work. This oscillator mixer consists of an individual mixer stacked on a voltage-controlled oscillator (VCO). The proposed stacked structure allows entire mixer current to be reused by the VCO cross-coupled pair to reduce the total current consumption of the individual VCO and mixer. Using individual supply voltages and eliminating the tail current source, the stacked topology requires low supply voltage. The DC power consumed by the oscillator is 1.7 mW and mixer is 0.2 mW. The power consumed by discrete structures is high when compared to the proposed stacked structure. At 4.2 GHz a voltage gain of 39 dB and an IIP3 is -12.4 dBm are measured at a supply voltage of 0.9V and with a power consumption of only 1.9 mW.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of a High Range, High Efficiency Spread Spectrum Transmitter for Audio Communication Applications

This work proposes a direct sequence spread spectrum transmitter with high transmission range and efficiency for audio signals. It is shown that by choosing high process gain for spread spectrum signal the data could reach a range of 55km in the 2.4GHz ISM band. By employing a light modulation scheme, we have a relaxed SNR requirement for having a low bit error rate (BER) which translates to re...

متن کامل

Low-power low-voltage RF CMOS transceiver at 2.4 GHz

CMOS technology has reached its maturity. Therefore, design engineers used it for developing RF circuits. The advantages of CMOS technology are the higher integration, low-power consumption, low-voltage supply and low-cost compared with Bipolar technology. The use of CMOS process with low length for the channels of the MOSFETs is very important for high-frequency devices. This paper describes a...

متن کامل

Design of ultra-low voltage 0.5V CMOS current bleeding mixer

This paper presents an ultra-low voltage and low power current bleeding CMOS double balanced mixer targeted for ZigBee application in 2.4GHz frequency band. It introduces and discusses a modified CMOS based current bleeding mixer topology adopting a combination of NMOS current bleeding transistor, with a PMOS Local Oscillator (LO) switching stage and integrated inductors to achieve ultra-low vo...

متن کامل

WCDMA Direct Conversion Front End in 0.13um digital CMOS

This project presents a direct-conversion 3G front end in 0.13um digital CMOS for use with the 2.1 GHz WCDMA frequency band. These receivers, widely used in 3G mobile telephony, require low power consumption and cost effective integration with other systems while maintaining high linearity and sensitivity. This project includes the design of a differential LNA, a double-balanced mixer and an on...

متن کامل

A Differential K-Band UWB Transmitter for Short Range Radar Application with Continuous Running Local Oscillator

Abstract—The design of a differential K-band UWB (Ultra Wideband) Short Range Radar (SRR) transmitter in 90 nm bulk CMOS is presented. Implementation of SRRs in deep submicron CMOS technology is attractive, in terms of cost and monolithic integration of RF font-end with signal baseband processor. The transmitted pulse bandwidth limits the range resolution of the radar system. Due to the wide ba...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014